We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 male plug to black 5.5x2.5mm DC male connector on short cable

Fervit

Fervit XT60 Male to DC 5.5x2.5mm Male Power Adapter

SKU CH-976M-P7N8Z

An XT60 male to DC 5.5x2.5mm male adapter powers a TS100 soldering iron or FPV gear from a LiPo battery

  • Powers TS100 soldering iron from XT60 batteries for field repairs
  • Connects FPV drones and RC gear via DC 5.5×2.5 mm plug
  • High-temperature resistant materials ensure safe operation under load
  • Plug-and-play design requires no tools or soldering for quick setup
  • XT60 male to DC male adapter bridges battery packs to 5.5 mm devices

Fervit XT60 Male to DC 5.5x2.5mm Adapter

This adapter connects an XT60 battery output to a DC 5.5x2.5mm input for portable power. It is designed for the TS100 soldering iron and suits FPV pilots, drone operators and field technicians needing a compact link between a lipo pack and DC-powered gear. High-temperature materials and insulation support demanding outdoor use.

Suits TS100 owners with XT60 batteries.

The 5.5 mm by 2.5 mm barrel matches the TS100 and similar equipment, so users with that exact jack can power the iron directly from a flight pack. Buyers whose devices use a different barrel diameter, a locking connector or a higher voltage input should look at something else because this adapter only provides the stated DC size.

Connector pair: XT60 male to DC 5.5x2.5mm male

The single specification that decides fit is the connector pair: an XT60 male plug on one end and a 5.5 mm by 2.5 mm DC male plug on the other. No other interface or protocol is included, so compatibility rests entirely on matching both ends to the battery and the device.

Highlights

  • Powers TS100 soldering iron from XT60 batteries for field repairs
  • Connects FPV drones and RC gear via DC 5.5×2.5 mm plug
  • High-temperature resistant materials ensure safe operation under load
  • Plug-and-play design requires no tools or soldering for quick setup
  • XT60 male to DC male adapter bridges battery packs to 5.5 mm devices

Specifications

BrandFervit

Questions about this item

Does the adapter include the TS100 soldering iron or the XT60 battery, or must I supply them separately?

The adapter is a standalone cable with an XT60 male plug on one end and a DC 5.5x2.5mm male plug on the other; the TS100 soldering iron and the XT60-output battery are not included and must be provided separately.

The title mentions SC100 protocol — does this adapter only work with SC100-capable batteries or will it work with any XT60 source?

The adapter is a passive connector; it passes whatever voltage and current the connected XT60 battery delivers, so it works with any XT60 power source regardless of protocol.

My TS100 iron needs up to 60 W — will this adapter handle that power level safely?

The XT60 connector is rated for 60 A continuous current and the DC 5.5x2.5mm plug is a standard 100 W interface, so the adapter can carry the 60 W required by the TS100 without issue.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.