We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 male plug to black DC 5.5x2.5mm female jack adapter

Fervit

Fervit XT60 Male to DC 5.5x2.5mm Female Power Adapter

SKU CH-4H36-592AJ

Connects an XT60 battery to 5.5×2.5 mm DC devices such as a TS100 soldering iron for field repairs

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Power FPV drones and RC gear from a standard XT60 source
  • Use solar cells or vehicle outlets with 5.5×2.5 mm DC devices
  • High-temperature resistant materials maintain safe operation under load
  • Plug-and-play design enables quick field repairs without tools

Field-repair adapter for TS100 soldering iron

This XT60 male to DC 5.5×2.5 mm female adapter lets you run a TS100 soldering iron directly from an XT60-equipped LiPo battery. It targets FPV pilots and multicopter builders who need reliable power for on-site repairs. The plug-and-play design requires no soldering or configuration.

High-temperature insulation for continuous loads

Rated materials resist heat during extended soldering sessions while maintaining stable contact resistance. The connector pair handles the SC100 fast-charge protocol up to 100 W without audible noise or voltage sag. No active cooling is required in normal field use.

Broad compatibility across DC-powered gear

Beyond the TS100, the DC 5.5×2.5 mm output suits FPV video transmitters, solar chargers, vehicle accessories and remote-control toys. One adapter replaces multiple cable types in a field kit, reducing weight and connection points for multicopter operators.

Highlights

  • Connect TS100 soldering iron directly to XT60 battery packs
  • Power FPV drones and RC gear from a standard XT60 source
  • Use solar cells or vehicle outlets with 5.5×2.5 mm DC devices
  • High-temperature resistant materials maintain safe operation under load
  • Plug-and-play design enables quick field repairs without tools

Specifications

BrandFervit

Questions about this item

How do I connect the XT60 male end to my battery without damaging the pins?

Align the yellow XT60 male connector with the battery's female XT60 port and push straight in until it clicks; forcing it at an angle bends the 60 A rated pins.

Will the DC 5.5x2.5 mm female jack wear out from repeated TS100 soldering iron use?

The brass centre pin and barrel are rated for high temperature resistance; inspect for looseness or carbon build-up after heavy field sessions and replace the adapter if the fit feels slack.

What stops me from drawing more than 100 W through this adapter during a long soldering job?

The SC100 protocol handshake limits output to 100 W; if the TS100 requests more, the battery or adapter will cut power rather than overheat.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.