Fervit
Fervit XT60 Male SC100 to DC 5.5x2.1mm Male Power Adapter
Connects an XT60 battery to a 5.5x2.1 mm DC device for field charging and repairs
- XT60 male connector plugs directly into LiPo battery packs
- SC100 protocol supports up to 100 W fast charging for TS100 soldering iron
- DC 5.5 x 2.1 mm barrel jack fits common FPV and RC gear
- Ready-made cable saves soldering time during field repairs
- Compact adapter suits drones, solar rigs, vehicles and remote-control toys
XT60 Male to DC 5.5x2.1mm Adapter
This adapter bridges an XT60 male connector to a DC 5.5 x 2.1 mm male plug, enabling direct power from RC LiPo batteries. It targets FPV pilots, multicopter builders and field technicians who need a compact link between battery packs and DC-powered gear. The SC100 protocol support allows fast-charging negotiation with compatible sources.
Build quality and daily use
The moulded housing secures both connectors without bulky strain reliefs, so the joint slides into tight frames on quads or fixed-wing airframes. Gold-plated contacts on the XT60 side resist corrosion from outdoor flying, while the DC barrel fits the TS100 soldering iron and similar 5.5 x 2.1 mm inputs. No tools are required; the polarized XT60 prevents reverse polarity during rapid field swaps.
Upgrade path and when it matters
The cable replaces jury-rigged pigtails or bulky balance-board tap cables that add weight and failure points. Pilots moving from soldered splices gain a reliable quick-disconnect for bench testing and trackside repairs. The jump is worth it when you regularly power a TS100 iron, FPV video transmitter or other 5.5 x 2.1 mm device from 60 100 compatible packs and want a single adapter that survives repeated insertion cycles.
Highlights
- XT60 male connector plugs directly into LiPo battery packs
- SC100 protocol supports up to 100 W fast charging for TS100 soldering iron
- DC 5.5 x 2.1 mm barrel jack fits common FPV and RC gear
- Ready-made cable saves soldering time during field repairs
- Compact adapter suits drones, solar rigs, vehicles and remote-control toys
Specifications
| Brand | Fervit |
|---|
Questions about this item
What voltage does the XT60 SC100 protocol cap at in practice?
The SC100 protocol supports up to 100 W, so the practical voltage limit depends on the connected battery and device.
What physical clearance does the XT60 male connector need to mate?
The XT60 male plug requires standard XT60 female socket clearance; the 5.5 × 2.1 mm DC male tip fits matching barrel jacks.
How do you install this adapter on a TS100 soldering iron, and what step is often missed?
Plug the XT60 end into the battery, then insert the DC 5.5 × 2.1 mm tip into the TS100; the missed step is confirming the battery voltage matches the iron's input range.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115651BTC
In stock
