We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 female connector linked to black DC 7.9x5.4mm female jack by short cable

Fervit

Fervit XT60 Female to DC 7.9x5.4mm Female Power Adapter

SKU CH-SZRA-7MBB3

Connects an XT60 battery to 7.9×5.4 mm DC devices such as a TS100 soldering iron for field repairs

  • Powers TS100 soldering iron directly from XT60 battery packs
  • XT60 to 7.9x5.4 mm DC adapter enables field repairs
  • High-temperature resistant materials maintain safe operation under load
  • Plug-and-play design connects FPV drones, solar cells and RC toys
  • SC100 protocol support allows fast charging from compatible XT60 sources

XT60 to DC 7.9x5.4mm Adapter

This Fervit adapter converts an XT60 battery connector to a 7.9 by 5.4 mm DC barrel jack. It is built for pilots and hobbyists who power field equipment from flight packs. High temperature resistance and insulation suit outdoor use. Plug and play operation requires no tools or soldering.

FPV Pilots and Field Technicians

The adapter suits anyone running a TS100 soldering iron, FPV video gear or similar DC devices from an XT60 source. Builders needing a different barrel size or a higher current rating than the SC100 protocol allows should look elsewhere. Users without XT60 batteries gain nothing from this connector pair.

SC100 Fast Charge Protocol

The single specification that decides fit is the SC100 fast charge protocol carried over the XT60 interface. Only power sources and devices that support this handshake will negotiate the required voltage and current. Without matching protocol support the adapter remains inactive.

Highlights

  • Powers TS100 soldering iron directly from XT60 battery packs
  • XT60 to 7.9x5.4 mm DC adapter enables field repairs
  • High-temperature resistant materials maintain safe operation under load
  • Plug-and-play design connects FPV drones, solar cells and RC toys
  • SC100 protocol support allows fast charging from compatible XT60 sources

Specifications

BrandFervit

Questions about this item

Which DC connector size does this adapter provide for the TS100 soldering iron?

The adapter ends in a 7.9x5.4 mm DC female jack, which matches the TS100's input so you can power the iron directly from an XT60 battery.

What does the SC100 marking mean when I plug a 6S LiPo into the TS100?

SC100 identifies the adapter as rated for 100 W continuous power, allowing the TS100 to draw its full operating wattage from a 6S pack without the connector overheating.

How does the XT60 interface limit what I can connect on the battery side?

The XT60 female connector accepts standard XT60 male plugs rated to 60 A, so any 2-6S LiPo with that plug can supply the TS100 while the adapter handles up to 100 W.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.