We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 female plug to silver DC 5.5x2.5mm male jack adapter cable

Fervit

Fervit XT60 Female to DC 5.5x2.5mm Male Power Adapter

SKU CH-DK36-4EB0S

An XT60 female to DC 5.5×2.5 mm male adapter connects a TS100 soldering iron or FPV gear to a 60 A battery for field repairs

  • Powers TS100 soldering iron from XT60 battery packs
  • Connects FPV drones, RC toys and solar gear via DC 5.5x2.5mm
  • High-temperature resistant materials ensure safe operation under load
  • Plug-and-play design requires no tools or configuration for field use
  • XT60 female to DC male adapter bridges battery and device power needs

XT60 Female to DC 5.5x2.5mm Adapter

This adapter converts an XT60 battery output to a 5.5 mm by 2.5 mm DC barrel plug. It is built for hobbyists and field technicians who need to power devices such as the TS100 soldering iron from a LiPo pack. The plug-and-play design requires no soldering or tools.

High-temperature insulation and rugged moulding

The housing uses heat-resistant materials and solid insulation to withstand the currents drawn by soldering irons and similar loads. Connectors seat firmly, reducing the chance of intermittent contact during vibration or movement. The compact form factor fits easily in a field-repair kit or flight bag.

Limited to devices accepting 5.5x2.5mm DC input

The barrel connector locks the adapter to gear that uses this specific centre-positive plug. Equipment with different barrel sizes, screw terminals or USB-C power cannot be connected without an additional converter. The XT60 side only mates with matching XT60 male connectors.

Highlights

  • Powers TS100 soldering iron from XT60 battery packs
  • Connects FPV drones, RC toys and solar gear via DC 5.5x2.5mm
  • High-temperature resistant materials ensure safe operation under load
  • Plug-and-play design requires no tools or configuration for field use
  • XT60 female to DC male adapter bridges battery and device power needs

Specifications

BrandFervit

Questions about this item

Does the XT60 connector support the SC100 fast-charging protocol up to 100 W?

Yes, the adapter is described as an SC100 protocol XT60 female to DC 5.5×2.5 mm male, intended for fast-charging applications such as powering a TS100 soldering iron from a compatible battery.

What are the exact dimensions of the DC barrel plug on this adapter?

The DC connector is a 5.5 mm outer diameter by 2.5 mm inner diameter male barrel plug, matching the standard input on the TS100 and many similar devices.

Is any soldering or wiring required to use this adapter with a TS100 soldering iron?

No soldering is needed; the adapter is plug-and-play — connect the XT60 female end to the battery and the DC male end directly into the TS100’s power jack.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.