We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB sync cable with 10-pin connector for Sony Handycam

Fervit

Fervit VMC-15FS 10-pin to USB sync cable for Sony Handycam

SKU CH-KGAX-B134W

Connects compatible Sony Handycam models to a PC or Mac via 10-pin to USB for data sync

  • Transfer footage fast via direct 10-pin to USB link
  • Works with DCR-SX85, DCR-SX85e, DCR-SR220, DCR-SR220e, DCR-SR290, DCR-SR290e
  • Sync data without extra adapters using the VMC-15FS cable
  • Connects camcorder to PC or Mac through standard USB port
  • Replaces original Sony cable with matching 10-pin connector

Purpose and compatibility

This cable links select Sony Handycam camcorders to a computer using a 10-pin connector on the camera side and a standard USB plug on the other. It supports the DCR-SX85, DCR-SX85e, DCR-SR220, DCR-SR220e, DCR-SR290 and DCR-SR290e models for transferring recorded footage. Buyers with camcorders that use a different proprietary port or a multi-terminal shoe will need a different cable.

Thermals noise and power

The cable draws its operating power directly from the host USB port and contains no active electronics that generate measurable heat or audible noise. No external power supply is required and the assembly adds negligible load to the computer’s USB bus. Users who need powered data transfer over longer distances should consider an active repeater cable instead.

Build integration

The 10-pin end mates with the Handycam’s dedicated sync socket while the USB-A end fits any free Type-A port on a PC or Mac. Its fixed length keeps the camera close to the workstation during ingest, freeing the user from proprietary docking cradles. Builders assembling a portable capture kit should verify that their laptop provides a Type-A port or carry a suitable adapter.

Highlights

  • Transfer footage fast via direct 10-pin to USB link
  • Works with DCR-SX85, DCR-SX85e, DCR-SR220, DCR-SR220e, DCR-SR290, DCR-SR290e
  • Sync data without extra adapters using the VMC-15FS cable
  • Connects camcorder to PC or Mac through standard USB port
  • Replaces original Sony cable with matching 10-pin connector

Specifications

BrandFervit

Questions about this item

How do I connect the 10-pin end to my DCR-SR220 and what is the common mistake?

Align the 10-pin plug with the Handycam's recessed port and push straight in until it clicks; forcing it at an angle bends the delicate pins.

What part of the VMC-15FS cable is most likely to need replacement after repeated use?

The strain relief where the 10-pin moulding meets the wire fatigues first; inspect for cracking if the camcorder only syncs when the cable is held in a certain position.

What transfer-speed limit appears first when I copy long videos from my DCR-SX85e?

The camcorder's own USB 2.0 interface caps sustained throughput, so the cable itself is not the bottleneck during large file transfers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.