Fervit
Fervit VGA 15Pin Male-Female 90° Angled Adapter 2pcs
Two angled VGA adapters with 15-pin male and female screw connectors fit tight spaces and support 1080P at 60 Hz
- Fits tight spaces with 90° angled design
- Two adapters included for multiple connections
- Supports 1080P@60hz high-definition video
- Secure VGA 15-pin screw connections
- Extends displays to monitors, TVs, projectors
15-pin VGA angled adapter pair
This Fervit adapter set includes two 90-degree HDB15 male-to-female extensions. Each unit has thumbscrews on the male end and screw nuts on the female end for a secure fit. The right-angle design lets you plug into tight ports where a straight cable would not fit. It carries standard VGA RGB signals to monitors, projectors or LCD TVs.
Builders with cramped rear I/O or wall-mounted
The angled shape solves clearance problems behind graphics cards, docking stations or flush-mounted screens. It supports 1080P at 60 Hz video, which is adequate for office work, legacy hardware and basic signage. Buyers who need higher resolutions, refresh rates above 60 Hz or digital-only connectors such as HDMI or DisplayPort should choose a different solution.
Tool-free installation with captive screws
Align the 15 pins, push the male connector into the source port and tighten the thumbscrews by hand. Then attach the display cable to the female end and secure its screw nuts. The only common issue is bent pins if the adapter is forced at the wrong angle; check alignment before applying pressure. No drivers or software are required.
Highlights
- Fits tight spaces with 90° angled design
- Two adapters included for multiple connections
- Supports 1080P@60hz high-definition video
- Secure VGA 15-pin screw connections
- Extends displays to monitors, TVs, projectors
Specifications
| Brand | Fervit |
|---|
Questions about this item
What does the male end of this Fervit VGA adapter screw into?
The male DE-15 plug with thumbscrews fits any standard 15-pin VGA output on a graphics card, laptop or other video source.
Will the 90-degree angle on these adapters clear the back of my older monitor that has recessed VGA ports?
Yes, the up-and-down 90° design lets the cable run parallel to the panel, avoiding interference with tight recesses or adjacent connectors.
How can I confirm the adapter is passing a 1080p 60 Hz signal correctly after connecting it?
Open your OS display settings and verify the external monitor is detected at 1080p 60 Hz with a stable, flicker-free image.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



