Fervit
Fervit VGA 15-pin male-female 90° angled adapter pair 1080p 60Hz
A pair of 90-degree angled VGA adapters with 15-pin male and female connectors, supporting 1080p at 60Hz for tight spaces
- Fits tight spaces with 90° angled connectors
- Pair includes both up and down orientations
- Thumbscrews and screw nuts secure every connection
- 1080p 60Hz video to monitors and projectors
- Standard 15-pin VGA fits most graphics cards
Tight-space VGA extension
This pair of Fervit 15-pin male-to-female adapters adds a 90-degree bend so cables can route close to the back of a monitor or projector where straight plugs would not fit. Each adapter carries a VGA RGB signal up to 1080p at 60 Hz, making them suited to legacy PCs, office displays and classroom projectors that still rely on analogue video.
Passive analogue signal
The adapters contain no active electronics, so they draw no power and generate no heat or noise during normal use. Signal quality depends entirely on the source device and cable length; the 90-degree angle simply relieves mechanical strain on the port without altering the electrical characteristics of the VGA link.
Thumbscrew and nut retention
Both ends feature screw fittings — thumbscrews on the male side and screw nuts on the female side — so the connection stays secure when equipment is moved or vibrated. The package supplies one upward-angled and one downward-angled unit, giving installers flexibility for ports that face up or down, but it includes no cables, drivers or configuration software.
Highlights
- Fits tight spaces with 90° angled connectors
- Pair includes both up and down orientations
- Thumbscrews and screw nuts secure every connection
- 1080p 60Hz video to monitors and projectors
- Standard 15-pin VGA fits most graphics cards
Specifications
| Brand | Fervit |
|---|
Questions about this item
How do I fit the 90 degree angled VGA adapter when the port is tight against the chassis?
Screw the male end with thumbscrews into the graphics card or monitor port, then attach your VGA cable to the female end with screw nuts; the 90 degree bend routes the cable parallel to the case so it clears adjacent connectors.
Will the thumbscrews or screw nuts on the 15 pin connectors need tightening over time?
The thumbscrews on the male plug and the screw nuts on the female socket hold the connection firm; if vibration loosens them, simply re-tighten by hand — no tools or replacement parts are required.
What resolution limit appears first when I run a long VGA cable through these adapters at 60Hz?
The pair is rated for 1080P at 60Hz; signal quality will degrade before any higher resolution or refresh rate can be sustained.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


