Fervit
Fervit USB4 V2 cable 1.6ft 80Gbps 240W 8K@60Hz Silver
A 1.6 ft USB‑C cable delivering 80 Gbps data, 240 W charging and 8K@60 Hz video for Thunderbolt 5 devices in silver
- Super-soft braided jacket stays flexible on the desk
- 80 Gbps bandwidth moves huge files in seconds
- 240 W charging powers laptops and phones fast
- 8K at 60 Hz or dual 4K monitors from one cable
- Works with Thunderbolt 5, 4 and 3 ports
Cable purpose and audience
This Fervit USB4 V2 cable connects USB-C devices at up to 80Gbps and delivers up to 240W of power. It suits professionals who move large media files between Thunderbolt 5 hosts and storage, and users who need a single cable for high-resolution external displays and fast laptop charging. The 1.6ft length keeps desk runs tidy without excess slack. Buyers who require longer reach for wall-mounted monitors or across-room docking should consider a different length.
Thermals noise and power
The integrated E-marker chip negotiates PD 3.1 contracts up to 48V at 5A, enabling 240W charging while remaining backward compatible with 140W, 100W and 60W profiles. During sustained 80Gbps transfers or maximum-power charging the super-soft braided jacket stays pliable and does not stiffen with heat. No active cooling or fan is present, so operation is silent in normal use.
Accessories and software impact
The cable itself is the only item supplied; no adapters, strap or carrying pouch are included. Because video output relies on DP Alt Mode, the host and display must both support that feature for 8K at 60Hz or dual 4K at 60Hz operation. Without DP Alt Mode the cable still provides full data and charging performance. No driver or firmware installation is required on any supported platform.
Highlights
- Super-soft braided jacket stays flexible on the desk
- 80 Gbps bandwidth moves huge files in seconds
- 240 W charging powers laptops and phones fast
- 8K at 60 Hz or dual 4K monitors from one cable
- Works with Thunderbolt 5, 4 and 3 ports
Specifications
| Brand | Fervit |
|---|
Questions about this item
How do I plug the 1.6ft USB-C cable in so the E-marker chip negotiates 240W charging?
Insert either end fully until it clicks; the built-in E-marker chip then communicates with the PD 3.1 host to enable up to 48V5A power delivery.
What part of the cable wears out first and needs replacing?
The braided jacket and connector strain reliefs absorb repeated bending; if the jacket frays or a connector becomes loose, replace the whole cable.
At what data rate does the link drop first during a long 80Gbps transfer?
Sustained 80Gbps throughput depends on both host and device supporting USB4 Ver2.0; if either end falls back to 40Gbps or lower, the cable follows that lower speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



