Fervit
Fervit USB4 cable 80Gbps 240W 8K@60Hz 90° 0.8ft
USB4 cable transfers data up to 80Gbps, delivers 240W charging, and drives 8K@60Hz video through a 90-degree connector
- Space-saving 90° design fits tight ports
- 80Gbps USB4 2.0 bandwidth for Thunderbolt 5 devices
- 240W PD 3.1 charging with E-marker chip
- 8K@60Hz video output via DP Alt Mode
- Backward compatible with 40, 20, 10, 5Gbps speeds
What the cable is
This Fervit USB4 cable is a new USB-C to USB-C cable that supports the USB4 Version 2.0 standard with up to 80Gbps data transfer bandwidth. It also delivers up to 240W power delivery under the PD 3.1 specification and carries 8K video at 60Hz. The 0.8ft length uses a flat copper core for flexibility in tight spaces.
Who it suits and who it does not
It suits users with Thunderbolt 5 or USB4 80Gbps hosts who need maximum throughput and high-wattage charging in a very short run. It also works with 40, 20, 10 and 5Gbps devices. Buyers who need a longer reach between devices or whose ports lack DisplayPort Alt Mode for video output should look at something else.
Behaviour under sustained load
The integrated E-Marker chip manages voltage up to 48V at 5A and negotiates power dynamically, allowing the cable to maintain 240W charging and 80Gbps signalling during extended sessions. Intelligent current regulation prevents overcharging and shifts to battery protection once the connected device reaches full capacity.
Highlights
- Space-saving 90° design fits tight ports
- 80Gbps USB4 2.0 bandwidth for Thunderbolt 5 devices
- 240W PD 3.1 charging with E-marker chip
- 8K@60Hz video output via DP Alt Mode
- Backward compatible with 40, 20, 10, 5Gbps speeds
Specifications
| Brand | Fervit |
|---|
Questions about this item
What must my laptop or charger already provide for this cable to deliver 240W charging?
The power source must support USB PD 3.1 at up to 48V5A; the cable’s built-in E-marker chip will negotiate the correct voltage and current automatically.
Will the 80Gbps data rate work if I connect a Thunderbolt 4 dock that only runs at 40Gbps?
Yes, the cable is backward compatible with 40, 20, 10 and 5Gbps links, so it will operate at the dock’s maximum 40Gbps speed.
How can I confirm the cable is driving an 8K60 display correctly after I plug it in?
Open your OS display settings and verify the external monitor is running at 8K resolution and 60Hz refresh rate; this only works when both USB-C ports support DP Alt Mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



