Fervit
Fervit USB4 cable 0.5 ft 80Gbps 240W 8K@60Hz
A short USB-C cable delivering 80Gbps data, 240W charging and 8K@60Hz video for Thunderbolt 5 and USB4 devices
- Transfer large files in seconds with 80Gbps bandwidth
- Charge laptops at 240W via PD 3.1 E-marker chip
- Drive an 8K monitor at 60Hz over USB-C
- Works with Thunderbolt 5, 4 and 3 hosts
- Backward compatible with 40, 20, 10 and 5Gbps links
Fervit USB4 cable 80 Gbps 0.5 ft
This 0.5 ft USB-C cable is built for professionals who move large media files between Thunderbolt 5 or USB4 Version 2.0 hosts and peripherals. It also delivers up to 240 W of power for charging laptops and phones from a single connection. The short length keeps a tidy desk setup while maintaining full bandwidth.
Deciding spec 80 Gbps bandwidth
The cable is certified for USB4 Version 2.0 at 80 Gbps and remains backward compatible with 40, 20, 10 and 5 Gbps links. An integrated E-Marker chip negotiates PD 3.1 at 48 V 5 A for 240 W charging and falls back to PD 3.0 and 2.0 for 140, 100 or 60 W devices. Video output requires host ports that support DP Alt Mode.
Sustained-load behaviour 240 W charging and 8K video
Under continuous use the E-Marker regulates current and voltage to sustain 240 W charging without thermal throttling. The shielded construction maintains 80 Gbps throughput during extended bulk transfers. It drives a single 8K 60 Hz display or two 4K 60 Hz monitors simultaneously when the host supports multi-stream transport.
Highlights
- Transfer large files in seconds with 80Gbps bandwidth
- Charge laptops at 240W via PD 3.1 E-marker chip
- Drive an 8K monitor at 60Hz over USB-C
- Works with Thunderbolt 5, 4 and 3 hosts
- Backward compatible with 40, 20, 10 and 5Gbps links
Specifications
| Brand | Fervit |
|---|
Questions about this item
What does 80Gbps mean when I plug this cable into my laptop?
It allows the maximum USB4 Ver2.0 bandwidth of 80Gbps for Thunderbolt 5 devices, and drops to 40, 20, 10 or 5Gbps with older hosts.
Which standard caps the 240W charging in real use?
PD 3.1 with the built-in E-marker chip negotiates up to 48V5A, and falls back to PD 3.0 or 2.0 for 140, 100 or 60W devices.
What do I need on my device for the 8K@60Hz video to work?
The USB-C port must support DP Alt Mode; dual-monitor setups require two separate cables.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



