Fervit
Fervit USB2.0 Micro-USB USB-C Socket UP Angle
Micro-USB and USB-C socket angled for tight FPV aerial-photography builds
- USB 2.0 speed connects devices to PC or laptop
- Upward-angle Micro-USB socket fits tight multicopter frames
- USB-C socket option available for alternative builds
- Single connector supplied — choose the end you need
- Optional FPC flex cables from 10 cm to 80 cm complete the link
Micro-USB & USB-C Connector
This Fervit connector features Micro-USB and USB-C sockets in an UP angle form factor. It is supplied as a single connector for FPV multicopter aerial photography builds. The component provides a USB 2.0 interface to link a USB device to a PC or laptop. It suits builders needing a specific board-level USB termination.
Suits FPV builds; not full cables
This part suits drone builders integrating a USB 2.0 port onto a flight controller or HD video transmitter board. It is not for users needing a complete, shielded cable assembly with moulded strain relief. Buyers who want a ready-to-use link between two devices should look at finished cable products instead.
UP angle mounting orientation
The connector uses an UP angle mounting orientation that determines how the port sits relative to the PCB. This geometry decides whether the part fits the board layout and enclosure clearance in a multicopter frame. Verify the angle matches the design before ordering.
Highlights
- USB 2.0 speed connects devices to PC or laptop
- Upward-angle Micro-USB socket fits tight multicopter frames
- USB-C socket option available for alternative builds
- Single connector supplied — choose the end you need
- Optional FPC flex cables from 10 cm to 80 cm complete the link
Specifications
| Brand | Fervit |
|---|
Questions about this item
Does the USB 2.0 Micro-USB connector support the standard 2.0 data rate?
Yes, the connector is specified for USB 2.0, which provides the standard 2.0 signalling rate for data transfer.
What physical clearance does the UP-angle Micro-USB socket need to fit?
The UP-angle orientation routes the cable upward from the board, so allow enough vertical space above the mounting surface for the plug and cable bend radius.
How is the FPC cable installed to this socket, and what step is often missed?
Insert the FPC cable into the socket's ZIF contacts and lock the actuator; the step often missed is fully seating the cable before closing the latch to ensure reliable contact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



