We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-C to DC 5.5×2.5 mm cable with LED display, 1.5 m

Fervit

Fervit USB-C to DC 5.5×2.5 mm 140 W cable with LED display 1.5 m

SKU CH-MEQT-91GMS

Converts USB-C PD up to 140 W into DC 5.5 mm output with a real-time LED voltage, current and power display

  • Delivers up to 140 W charging with 20 V 7 A PD trigger
  • Real-time LED display shows voltage current and power during charging
  • Works with 5.5 mm DC laptops using a 140 W USB-C charger
  • Supports 5 V 9 V 12 V 15 V 20 V output via button press
  • 5 m alloy-sheathed cable for durable plug-and-play use

USB-C to DC 5.5×2.5 mm adapter

This adapter converts a USB-C power source into a DC 5.5 mm barrel output for laptops that lack USB-C charging. It supports Power Delivery and Quick Charge protocols to negotiate the required voltage. The unit is designed for users who need to power a barrel-jack laptop from a compatible USB-C charger.

Plug-and-play with voltage selection

The cable works immediately when connected to a suitable 140 W USB-C charger. A button cycles the LED display between voltage, current and power readings without interrupting the power flow. The only common issue is using a charger rated below 140 W, which prevents the adapter from delivering its maximum output.

Limited by charger capability

The adapter can request up to 20 V at 7 A, but the actual power depends entirely on the connected USB-C charger. If the charger cannot supply 140 W, the output will be lower and may not meet the laptop’s needs. The fixed 1.5 m cable length also restricts placement between the charger and the device.

Highlights

  • Delivers up to 140 W charging with 20 V 7 A PD trigger
  • Real-time LED display shows voltage current and power during charging
  • Works with 5.5 mm DC laptops using a 140 W USB-C charger
  • Supports 5 V 9 V 12 V 15 V 20 V output via button press
  • 5 m alloy-sheathed cable for durable plug-and-play use

Specifications

BrandFervit

Questions about this item

How can I confirm the cable is delivering the correct voltage and current after I plug it in?

The built‑in LED display shows real‑time voltage, current and power, so you can verify the output matches the selected 20 V, 15 V, 12 V, 9 V or 5 V setting.

What comes in the box and do I need to buy a charger separately?

The package contains the 1.5 m USB‑C to DC 5.5 × 2.5 mm cable with LED display; a USB‑C PD charger rated at 140 W or higher must be purchased separately.

Which voltage setting should I select for a laptop that requires 20 V 7 A charging?

Press the button to cycle the display until it reads 20 V; the cable’s PD trigger will then request 20 V 7 A (140 W) from a compatible 140 W or higher USB‑C charger.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.