Fervit
Fervit USB-C to DC 11.0×4.5 mm 135W PD Charge Cable
Charges compatible laptops through a rectangular 11.0×4.5 mm DC port using a 135 W or 140 W USB-C charger
- Delivers up to 135 W charging via integrated PD trigger
- Works with 135 W or 140 W USB-C power adapters
- Fits laptops using an 11.0 × 4.5 mm DC rectangle port
- Compatible with ThinkPad X1 and Legion Y7000 series
- Supplies 20 V at 6.25 A for full-speed laptop power
Purpose and compatibility
This cable converts a USB-C power-delivery source into a DC rectangle connector measuring 11.0 by 4.5 mm. It is intended for users who want to charge compatible laptops such as the ThinkPad X1 or Legion Y7000 series from a high-wattage USB-C charger.
Power delivery and thermal behaviour
The integrated PD trigger requests 20 V at 6.25 A for a maximum of 135 W from a 135 W or 140 W USB-C charger. Because the adapter is passive aside from the trigger chip, it adds negligible heat and no audible noise during normal charging.
Build integration and constraints
The cable requires a USB-C charger rated at 135 W or higher; lower-wattage sources will not provide the negotiated voltage. It frees the user from carrying the original proprietary brick but cannot charge devices that need a different DC barrel size or a lower fixed voltage.
Highlights
- Delivers up to 135 W charging via integrated PD trigger
- Works with 135 W or 140 W USB-C power adapters
- Fits laptops using an 11.0 × 4.5 mm DC rectangle port
- Compatible with ThinkPad X1 and Legion Y7000 series
- Supplies 20 V at 6.25 A for full-speed laptop power
Specifications
| Brand | Fervit |
|---|
Questions about this item
How do I connect the 11.0×4.5 mm rectangle plug and what step do people miss?
Plug the USB-C male end into a 135 W or 140 W PD charger first, then insert the rectangle male into the laptop DC jack; the built-in trigger only negotiates 20 V 6.25 A when the charger advertises 135 W or higher.
What part of this cable wears out first and needs replacement?
The USB-C male connector and the rectangle male tip endure repeated insertion cycles; the internal PD emulator trigger is solid-state, so mechanical wear on the two plugs is the typical failure point.
At what power level does the cable hit its limit during a long charge session?
The cable is rated for 135 W maximum output at 20 V 6.25 A; sustained loads above that will exceed the built-in trigger’s negotiated profile and the cable will not pass more power.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



