Fervit
Fervit USB-C Female to Micro USB 2.0 Male 90 Degree Left Angled Adapter
A 90-degree left-angled adapter connects a USB-C female port to a Micro USB 2.0 male plug
- USB-C female port accepts modern cables
- Micro USB 2.0 male plugs into legacy devices
- 90 degree left angle reduces cable strain
- Supports USB 2.0 data transfer speeds
- Brand new condition from Fervit
Adapter purpose and audience
This adapter converts a USB-C female port to a Micro USB 2.0 male connector with a 90 degree left angled plug. It suits users who need to connect legacy Micro USB cables or devices to a USB-C port in tight spaces where a straight connector would not fit. The left angled design reduces strain on the port and cable. It is not for buyers who require USB 3.0 or higher data rates.
Upgrade context and value
The adapter replaces a straight Micro USB to USB-C dongle when clearance is limited or when cable routing demands a left turn. The jump is worth it if the existing straight adapter blocks adjacent ports or stresses the socket. It does not increase the 2.0 speed limit of the connection. It is not for setups that need right angled orientation or reversible USB-C plugging on the Micro USB side.
Compatibility checklist
Verify that the host device provides a USB-C female receptacle and that the peripheral uses a standard Micro USB 2.0 5 pin male interface. Confirm the left angled orientation matches the physical layout of your port and surrounding components. Check that USB 2.0 bandwidth meets the peripheral requirements. No driver installation is mentioned.
Highlights
- USB-C female port accepts modern cables
- Micro USB 2.0 male plugs into legacy devices
- 90 degree left angle reduces cable strain
- Supports USB 2.0 data transfer speeds
- Brand new condition from Fervit
Specifications
| Brand | Fervit |
|---|
Questions about this item
Which way does the 90 degree left angled Micro USB 2.0 male connector point?
The Micro USB 2.0 5-pin male end bends 90 degrees to the left so the USB-C female port faces sideways for tight spaces.
Do I need any driver or tool to start using the adapter?
No driver or tool is required; plug the Micro USB male end into the host device and insert a USB-C cable into the female port.
Will the USB 2.0 data rate limit what I can do with a USB-C cable later?
Yes, the adapter is rated for USB 2.0 speeds so any connected USB-C cable will operate at USB 2.0 data rates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



