Fervit
Fervit USB-C Female to 4-Pin Header Cable 2.0mm Pitch 17.5cm 5-Pack
Adds USB-C ports to a case or panel with five 17.5 cm latch-mount cables supporting 480 Mbps data and 5 V 3 A power
- USB 2.0 at 480 Mbps for quick file moves
- Up to DC 5 V 3 A for fast charging
- Reversible USB-C plug inserts either way
- 5 cm cables reach internal headers cleanly
- Latch-mount female socket secures the connection
Five-piece USB-C internal cable kit
This set contains five USB-C female sockets each pre-wired to a four-pin header with a 2.0 mm pitch. The 17.5 cm length suits internal routing in desktop chassis or custom enclosures. Each connector supports USB 2.0 signalling at 480 Mbps and can deliver up to DC 5 V at 3 A when paired with a compatible host. The latch-mount design secures the socket to a panel or bracket.
Suited to DIY builders adding front-panel USB-C
Makers and system integrators who need multiple internal USB-C ports for front-panel access, test rigs or embedded projects will find the five-pack convenient. The reversible Type-C interface simplifies cable orientation. Buyers who require USB 3.x or higher bandwidth, or who need a single cable rather than a multipack, should consider other options.
Check header pin-out and panel cut-out before
Verify that your motherboard or controller provides a four-pin header with 2.0 mm spacing and the correct pin assignment for USB 2.0. Ensure the chassis panel has a suitable cut-out for the latch-mount socket. Confirm the 17.5 cm reach matches your internal routing path and that the host can supply 5 V at up to 3 A for attached devices.
Highlights
- USB 2.0 at 480 Mbps for quick file moves
- Up to DC 5 V 3 A for fast charging
- Reversible USB-C plug inserts either way
- 5 cm cables reach internal headers cleanly
- Latch-mount female socket secures the connection
Specifications
| Brand | Fervit |
|---|
Questions about this item
What internal header pitch does the 4-pin connector on this Fervit cable require?
The 4-pin header uses a 2.0 mm pitch, so your motherboard or front-panel PCB must provide a matching 2.0 mm 4-pin socket.
Can I run USB 2.0 peripherals at 480 Mbps through this cable while also drawing 5 V 3 A for charging?
Yes, the cable supports USB 2.0 at 480 Mbps and delivers up to 5 V 3 A simultaneously when paired with a compatible USB 2.0 Type-C power source.
How do I verify the latch-mount USB-C female socket is seated correctly after installation?
The latch should click firmly into the panel cut-out and the reversible Type-C plug inserts either way; test with a known-good device to confirm 480 Mbps data and 5 V power.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
