Fervit
Fervit USB C DIY Connector 5 Pack 2.54mm 4Pin USB 2.0 480Mbps 15W
A five-pack of vertical USB-C female sockets with 2.54 mm pitch wafer for DIY soldering, delivering USB 2.0 data at 480 Mbps and up to 15 W power
- USB 2.0 data at 480 Mbps for reliable device syncing
- DC 5 V supply delivers up to 15 W for compatible charging
- 54 mm pitch wafer socket simplifies DIY soldering assembly
- Vertical 4-pin Type-C female fits tight board layouts
- Five connectors per pack cover multiple repair or prototype builds
DIY USB-C Connector Pack
This five-pack supplies vertical USB-C female sockets with a 2.54 mm pitch wafer for through-hole soldering. Each connector carries USB 2.0 signals and DC 5 V power up to 15 W. The parts suit hobbyists and repair technicians adding or replacing a Type-C port on custom boards.
2.54 mm Pitch Solder Adapter
The wafer socket aligns on standard 2.54 mm spacing for straightforward hand assembly on perfboard or PCB. Pinout is limited to USB 2.0 data and 5 V supply; Power Delivery negotiation is not supported. Mates with any USB-C plug for peripheral or host connections.
USB 2.0 Type-C Port Upgrade
Replaces damaged or missing USB-C ports on devices that only require 480 Mbps data and 5 V charging. The jump is worthwhile when the original connector fails or when adding a Type-C interface to a legacy USB 2.0 design without PD demands.
Highlights
- USB 2.0 data at 480 Mbps for reliable device syncing
- DC 5 V supply delivers up to 15 W for compatible charging
- 54 mm pitch wafer socket simplifies DIY soldering assembly
- Vertical 4-pin Type-C female fits tight board layouts
- Five connectors per pack cover multiple repair or prototype builds
Specifications
| Brand | Fervit |
|---|
Questions about this item
Does the USB 2.0 Type-C interface support Power Delivery?
The pinout only carries USB 2.0 data and DC 5 V power; it does not support Type-C Power Delivery.
What hole spacing does the 2.54 mm pitch wafer need on a board?
The wafer matches a 2.54 mm grid, so drill or use a perfboard with that spacing for the four pins.
How do you solder the vertical socket without melting the wafer?
Tack one corner pin first, align the socket vertically, then solder the remaining three pins quickly with a fine tip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



