We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-A to USB-C cable, 4.9ft length, woven finish

Fervit

Fervit USB A to C Cable 4.9ft 10Gbps 60W

SKU CH-Y3Z1-0P4D8

Connects USB-A chargers or computers to USB-C devices at 10Gbps with 60W charging

  • Fast file backups with 10Gbps USB 3.2 transfer speed
  • Rapid 60W charging at 20V/3A via built-in E-Marker chip
  • Reliable Android Auto and CarPlay connection for in-car use
  • Comfortable 4.9ft reach avoids bending under desks or behind TVs
  • Works with legacy USB 1.0, 1.1, 2.0, 3.0 and 3.1 devices

4.9 ft USB A to C Cable

This cable connects a USB A port on a computer, charger or power bank to a USB C device such as a phone, tablet or laptop. It supports USB 3.2 Gen 2 data rates up to 10 Gbps and power delivery up to 60 W at 20 V/3 A. The 4.9 ft length suits desktop or sofa use without excess slack. It is built for users who need both fast file transfer and rapid charging in one cord.

Installation and common issues

Plug the USB A end into the host or charger and the USB C end into the device; no drivers are required. The cable is backward compatible with USB 3.1, 3.0, 2.0, 1.1 and 1.0 ports, so it works with older hardware at reduced speeds. A built-in E-Marker chip negotiates the 60 W power contract, so the charger must support USB Power Delivery at 20 V/3 A for maximum charging rate. If Android Auto or CarPlay does not connect, verify that the phone’s OTG function is enabled in settings.

Sustained load behaviour

During large file transfers the 10 Gbps link maintains throughput well above the 480 Mbps ceiling of USB 2.0, reducing backup times for multi-gigabyte folders. Under continuous 60 W charging the E-Marker chip regulates current to keep output stable at 3 A without overheating the connectors. The cable handles simultaneous data and maximum power delivery without throttling, making it suitable for extended tethered workflows or gaming while charging.

Highlights

  • Fast file backups with 10Gbps USB 3.2 transfer speed
  • Rapid 60W charging at 20V/3A via built-in E-Marker chip
  • Reliable Android Auto and CarPlay connection for in-car use
  • Comfortable 4.9ft reach avoids bending under desks or behind TVs
  • Works with legacy USB 1.0, 1.1, 2.0, 3.0 and 3.1 devices

Specifications

BrandFervit

Questions about this item

How do I confirm the cable is delivering 10Gbps transfer speed after connecting it?

Connect the cable between a USB 3.2 Gen 2 host port and a compatible device, then run a large file copy or benchmark tool. Sustained read/write speeds well above 480 Mbps indicate the 10Gbps link is active.

What comes in the box and do I need any extra adapters for 60W charging?

The package contains the 4.9 ft USB A to C cable only. No separate adapter is required; the built-in E-Marker chip enables 20V/3A (60W) charging directly from a USB A power source that supports that profile.

Which of the five available lengths should I choose for a desktop-to-phone setup?

The 4.9 ft length lets you use a phone comfortably while it charges from a rear-panel USB A port without pulling taut. Shorter 0.8 ft or 1.6 ft cables suit power-bank use; longer 3.3 ft or 6.6 ft cables reach across a room or behind furniture.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.