We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short USB-A female sockets with latch mounts and 10cm two-wire leads

Fervit

Fervit USB A Female to 2-Pin Cable 10cm 2pcs

SKU CH-K0MV-TMM85

Two latch-mount USB-A female sockets with 10 cm open-ended cables deliver DC 5 V power to internal devices

  • Latch-mount design secures the USB connection inside a cabinet
  • 10 cm cable length keeps internal wiring tidy
  • Supplies up to DC 5 V 3 A for reliable power delivery
  • USB 2.0 Type-A female socket fits standard peripherals
  • Two-piece set provides a spare for DIY projects

USB A Female to 2-Pin Adapter Set

This set includes two latch-mount cables that convert a USB Type-A female port to a 2-pin open-ended connection. Each cable measures 10cm including the connector. The design allows DIY builders to extend USB power connections inside a cabinet or enclosure. Power transfer is the only function provided.

Replaces Soldered USB Power Leads

The latch-mount sockets remove the need to solder wires directly to a PCB when adding a Type-A power input. The upgrade is worth it when a removable, serviceable connection is required for maintenance or module swaps. It suits projects where a permanent USB port must be mounted to a panel. Data lines are not connected through this adapter.

Limited to USB 2.0 Power Delivery

The cable supports up to DC 5V 3A throughput when paired with a USB 2.0 power source and device. No data transfer is possible because only the power pins are wired. The 10cm length restricts placement to internal, short-range routing. Builders needing data signals or longer reach must use a different solution.

Highlights

  • Latch-mount design secures the USB connection inside a cabinet
  • 10 cm cable length keeps internal wiring tidy
  • Supplies up to DC 5 V 3 A for reliable power delivery
  • USB 2.0 Type-A female socket fits standard peripherals
  • Two-piece set provides a spare for DIY projects

Specifications

BrandFervit

Questions about this item

What panel cut-out or spacing does the latch-mount female socket need?

The latch-mount female socket is designed to snap into a standard cabinet panel opening; the 10 cm cable tails give a little routing slack once the socket is seated.

Which step is most often missed when wiring the two open leads?

Polarity must be checked before soldering or crimping — the two-pin cable carries only DC 5 V power, so reversing the wires will prevent the connected device from receiving power.

What part of this assembly is likely to need replacement first?

The 10 cm cable and its two-pin leads see repeated flexing at the latch mount, so the cable itself is the component most likely to wear out before the USB 2.0 female socket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.