We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black internal cable with a 20-pin Type-E plug splitting to two 9-pin USB 2.0 headers and a small PCB hub

Fervit

Fervit USB 3.1 Type-E to 2×9-pin USB 2.0 hub cable

SKU CH-DQ5Z-K4F6R

Converts a motherboard USB 3.1 Type-E header into two 9-pin USB 2.0 ports at 480 Mbps with adhesive mounting

  • Converts a 20-pin Type-E header into two 9-pin USB 2.0 connectors
  • USB 2.0 hub chipset delivers 480 Mbps per port with 500 mA power
  • Adhesive backing lets you secure the adapter directly to the motherboard or chassis
  • Includes Type-E cable, Type-A cable and PCBA for immediate installation
  • Compact plug-in design fits any USB 3.0 or 2.0 header without extra brackets

Internal USB expansion for Type-E headers

This cable kit converts a single motherboard USB 3.1 Type-E header into two standard 9-pin USB 2.0 connectors. An on-board hub chipset maintains 480 Mbps throughput per port with 500 mA of 5 V power delivery. Builders adding front-panel ports or internal USB devices to newer boards will find it useful. The package includes a Type-E cable, a Type-A cable and the hub PCBA.

Check header layout and pin count before ordering

Verify that your motherboard exposes a 20-pin USB 3.1 Type-E header; older 19-pin USB 3.0 headers are not compatible. Ensure the two 9-pin connectors match the pin-out of your front-panel or accessory cables, as some vendors use 10-pin or 4-pin variants. The hub draws power from the header itself, so confirm the board can supply the rated current for both ports simultaneously.

Adhesive-backed PCBA for fixed internal mounting

The hub board carries a peel-off adhesive strip that lets you secure it directly to the motherboard tray or chassis wall without screws. Both 9-pin headers feature latching connectors to resist vibration in tower cases. Cables are sized for tight routing behind motherboard trays, keeping airflow paths clear. No external power or driver installation is required.

Highlights

  • Converts a 20-pin Type-E header into two 9-pin USB 2.0 connectors
  • USB 2.0 hub chipset delivers 480 Mbps per port with 500 mA power
  • Adhesive backing lets you secure the adapter directly to the motherboard or chassis
  • Includes Type-E cable, Type-A cable and PCBA for immediate installation
  • Compact plug-in design fits any USB 3.0 or 2.0 header without extra brackets

Specifications

BrandFervit

Questions about this item

What comes in the package and is any extra hardware required?

The box contains one Type-E cable, one Type-A cable and a PCBA hub with back glue for mounting; no extra hardware is needed.

Which version of this hub cable should I choose for a motherboard with a 20-pin Type-E header?

This single model converts a 20-pin Type-E header into two 9-pin USB 2.0 connectors, so it is the correct choice for that header.

What does the 480 Mbps figure mean once the hub is installed in a PC?

Each of the two 9-pin ports delivers up to 480 Mbps USB 2.0 speed and 500 mA at 5 V for connected devices.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.