Fervit
Fervit USB 3.1 Type-C to Rectangle 11.0x4.5mm PD Trigger Charge Cable
Connects a 65W or 87W USB-C charger to a rectangular 11.0x4.5mm laptop port, triggering 18-20V DC output
- Charge legacy laptops from modern USB-C chargers
- Built-in PD trigger negotiates 18-20 V output
- Rectangular 11.0×5.0 mm plug fits compatible ports
- Works with 65 W or 87 W USB-C power sources
- USB 3.1 Type-C female input for broad charger compatibility
Purpose and fit
This cable lets owners of Lenovo ThinkPad X1 Carbon models with an 11.0×4.5 mm DC barrel port use a 65 W or 87 W USB-C PD charger instead of the original brick. The integrated trigger negotiates 18 V or 20 V output, so the laptop receives the voltage it expects. It is not for devices that only accept 5 V over USB-C or that use a different barrel diameter.
Connector quality and daily use
The USB-C female end accepts any standard 65 W or 87 W PD charger, while the rectangular 11.0×5.0 mm male plug mates securely with the laptop socket. A moulded strain-relief protects the junction during frequent connect and disconnect cycles. The trigger circuit is embedded in the USB-C housing, keeping the cable profile slim for travel bags.
Power behaviour
The adapter requests 18 V or 20 V from the charger and passes that voltage directly to the laptop; 5 V is not supported. The charger must be rated at or above the laptop’s power draw, otherwise the trigger will not negotiate the required voltage. No active cooling is present, so the cable runs warm only under sustained high-load charging.
Highlights
- Charge legacy laptops from modern USB-C chargers
- Built-in PD trigger negotiates 18-20 V output
- Rectangular 11.0×5.0 mm plug fits compatible ports
- Works with 65 W or 87 W USB-C power sources
- USB 3.1 Type-C female input for broad charger compatibility
Specifications
| Brand | Fervit |
|---|
Questions about this item
Does the USB 3.1 Type-C input support 65 W and 87 W PD chargers?
The cable accepts a USB-C female input from a 65 W or 87 W Type-C PD charger and negotiates 18 V to 20 V output.
What is the exact size of the rectangular DC plug that fits the laptop?
The output plug measures 11.0 mm by 5.0 mm and is a male rectangle connector for compatible laptop ports.
How do I connect the cable so the PD trigger activates correctly?
Plug the USB-C charger into the cable's Type-C female end first, then insert the 11.0×5.0 mm rectangle into the laptop; the charger must exceed the laptop's power requirement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



