We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black vertical PCB adapter with USB-C and M-key NVME slot

Fervit

Fervit USB 3.1 Type-C to M-key NVME Adapter Vertical Black

SKU CH-Z8EX-9W33E

Connects an M-key NVME SSD to a USB 3.1 Type-C port in a vertical layout that fits 30, 42, 60 and 80 mm drives without opening the case

  • Connect NVMe storage externally via USB 3.1 Type-C host port
  • Vertical M-key connector installs drive without opening the computer case
  • Supports 30, 42, 60 and 80 mm NVMe NGFF M.2 SSD lengths
  • 67-pin M-key interface designed for NVMe protocol only, not SATA
  • SSD not included so you choose the capacity and brand you need

USB 3.1 Type-C to M-key NVME Adapter

This compact adapter lets you connect an M-key NVME solid-state drive to any host with a USB 3.1 Type-C port. It mounts the drive vertically on a small PCB so the SSD sits outside the chassis. No tools or case disassembly are required for installation. The SSD itself is not included.

For users adding external NVME storage

The device suits anyone who wants to read or write an M-key NVME drive over USB 3.1 without opening a laptop or desktop. Builders needing SATA M.2 support or B-key and B/M-key modules should look elsewhere because the connector is wired exclusively for M-key NVME. It also cannot power drives that require more current than the USB port supplies.

67-pin M-key connector fits 30 42 60 80 mm drives

The vertical socket accepts NGFF modules measuring 30, 42, 60 or 80 millimetres in length. Only M-key NVME drives are electrically compatible; SATA variants will not function. Verify your drive’s keying and protocol before purchase.

Highlights

  • Connect NVMe storage externally via USB 3.1 Type-C host port
  • Vertical M-key connector installs drive without opening the computer case
  • Supports 30, 42, 60 and 80 mm NVMe NGFF M.2 SSD lengths
  • 67-pin M-key interface designed for NVMe protocol only, not SATA
  • SSD not included so you choose the capacity and brand you need

Specifications

BrandFervit

Questions about this item

What M.2 SSD lengths does the vertical M-key slot accept?

The slot fits 30, 42, 60 and 80 mm NVME M-key drives; B-key or B/M-key SATA SSDs are not supported.

How is the adapter connected to the host and what common mistake should be avoided?

Plug the USB 3.1 Type-C end into the host port, then insert the NVME SSD into the vertical 67-pin M-key connector — ensure the drive is an M-key NVME model, not a SATA or B-key variant.

Will the SSD need active cooling or a firmware update when used with this adapter?

The bare PCBA has no fan or heatsink, so sustained heavy transfers may throttle a warm drive; adding a stick-on heatsink later is the only maintenance typically needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.