Fervit
Fervit USB 3.1 Type-C to DC 20V 5.5x2.5mm PD Trigger 90° Angled
Adapter converts a 65W or 87W USB-C charger to 18V or 20V DC output via 5.5×2.5mm and 2.1mm angled plugs
- Charge laptops from USB-C chargers with built-in PD trigger
- 90-degree angled connector reduces cable strain at the port
- Works with 65W or 87W USB-C power sources
- Delivers 18V to 20V DC via 5.5x2.5mm and 2.1mm plugs
- USB 3.1 Type-C input supports high-power charging scenarios
Power delivery for barrel laptops
This Fervit adapter lets you charge a laptop that uses a 5.5 x 2.5 mm DC jack from a USB-C power delivery charger rated at 65 W or 87 W. The built-in trigger negotiates an 18 V or 20 V output and blocks 5 V so the laptop receives the voltage it expects. A 90° angled plug reduces strain on the port.
Replacing a proprietary brick
Swap a dedicated barrel charger for a compact USB-C GaN charger when you travel or want a single power source for multiple devices. The upgrade makes sense if your existing USB-C charger can supply at least the wattage the laptop draws; the adapter itself does not boost power beyond what the charger provides.
Build integration notes
Connect the USB-C female end to the charger cable and the 5.5 x 2.5 mm or 2.1 mm male tip to the laptop. No driver or software setup is required. The adapter does not support 5 V devices and cannot be used with chargers below 65 W, so it is not for phones, tablets or low-power USB-C hubs.
Highlights
- Charge laptops from USB-C chargers with built-in PD trigger
- 90-degree angled connector reduces cable strain at the port
- Works with 65W or 87W USB-C power sources
- Delivers 18V to 20V DC via 5.5x2.5mm and 2.1mm plugs
- USB 3.1 Type-C input supports high-power charging scenarios
Specifications
| Brand | Fervit |
|---|
Questions about this item
Will the 5.5 x 2.5 mm DC plug fit my laptop's charging port?
The adapter terminates in a 5.5 mm outer and 2.5 mm inner diameter male barrel connector; match those dimensions to your laptop's DC input before use.
What is the correct way to connect the 90° angled adapter so the PD trigger negotiates 20 V?
Plug a 65 W or 87 W USB-C charger into the female Type-C end first, then insert the DC barrel into the laptop; the charger must exceed the laptop's power draw for the trigger to request 18–20 V.
When should I replace the cable if the DC connector becomes loose?
Replace the unit if the 5.5 x 2.5 mm barrel no longer seats firmly or if charging drops out when the cable moves, as the fixed connector cannot be serviced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



