We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB 3.1 Type-C cable with dual M2 screw-locking connectors, 120cm

Fervit

Fervit USB 3.1 Type-C Dual M2 Screw Locking 10Gbps Cable 120cm

SKU CH-NF7J-660ND

USB 3.1 Type-C cable with dual M2 screw-locking connectors for secure 10 Gbps data links, 120 cm long

  • Secure screw-lock connection prevents accidental disconnection with dual M2.0 panel-mount screws
  • 10 Gbps USB 3.1 bandwidth moves large files quickly over 1.2 m cable
  • Reversible Type-C plugs insert either way up for faster setup
  • Panel-mount design fits industrial enclosures and rack systems securely
  • Locking mechanism on both ends ensures reliable mating in vibration-prone environments

Secure Panel-Mount USB-C Cable

This 120 cm Fervit cable carries USB 3.1 data at 10 Gbps between two locking Type-C plugs. Each end uses dual M2.0 screws that clamp to panel-mount receptacles so vibration cannot unseat the connection. The reversible Type-C interface removes orientation errors during installation. It is built for fixed industrial or embedded links where accidental disconnects are unacceptable.

Who should use this and who should not

Engineers wiring rack-mount gear, test rigs or kiosk displays gain a screw-locked link that survives shock and cable tugs. Installers who need quick plug-and-play convenience or frequent hot-swap cycles should choose a standard friction-fit cable instead. The panel-mount screws also require matching threaded receptacles; systems without those cut-outs cannot use this cable.

Deciding spec: 10 Gbps USB 3.1 throughput

The cable is rated for 10 Gbps under the USB 3.1 specification, so it moves large sensor logs or video streams without bottlenecking the bus. If the host or device only supports 5 Gbps USB 3.0 the link will still work but at the lower speed. Verify that both ends of your link require and support 10 Gbps before specifying this part.

Highlights

  • Secure screw-lock connection prevents accidental disconnection with dual M2.0 panel-mount screws
  • 10 Gbps USB 3.1 bandwidth moves large files quickly over 1.2 m cable
  • Reversible Type-C plugs insert either way up for faster setup
  • Panel-mount design fits industrial enclosures and rack systems securely
  • Locking mechanism on both ends ensures reliable mating in vibration-prone environments

Specifications

BrandFervit

Questions about this item

How do I install the dual M2.0 screw-locking connectors on a panel, and what step is often missed?

Align each USB-C connector with the panel cut-out, insert the M2.0 screws through the flange holes, and tighten both screws evenly; the step often missed is securing the second screw before the first is fully seated.

What maintenance will the locking screws and reversible Type-C connectors need over time?

Periodically check that both M2.0 screws remain tight and free of corrosion; clean the reversible Type-C contacts with a dry brush if debris builds up.

At what data rate does the cable hit its limit during sustained transfers?

The cable is rated for 10 Gbps, so sustained throughput will plateau at that 10 Gbps ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.