We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three small angled adapters with Type-E female sockets and Type-C, Type-A and Type-E male plugs

Fervit

Fervit USB 3.1 Front Panel Type-E Adapter Kit (3 pcs)

SKU CH-9QA2-YN7B0

A three-piece adapter kit converting a motherboard USB 3.1 Type-E front-panel header to Type-C, Type-A or Type-E connectors at 10 Gbps

  • Connect front-panel USB 3.1 ports with three specialised adapters
  • Type-E female to Type-C male supports 10Gbps data
  • Type-E female to Type-A male supports 10Gbps data
  • Type-E female to Type-E male supports 10Gbps data
  • USB 3.1 header differs from USB 3.0 and is backwards compatible

Three-adapter kit for USB 3.1 front-panel headers

The Fervit kit supplies three angled adapters that convert a motherboard USB 3.1 Type-E header to Type-C, Type-A or another Type-E connector. Each adapter supports 10 Gbps throughput using the USB 3.1 pin layout while remaining backwards compatible with USB 3.0 headers. Builders fitting modern front-panel ports to older or mismatched headers can use the appropriate adapter without rewiring the case.

Thermals noise and power in normal use

Passive adapters add no active components, so they generate no measurable heat, produce no audible noise and draw no additional power beyond the signalling current already present on the USB 3.1 header. The short angled cable runs keep signal paths compact inside the chassis, avoiding airflow obstruction or cable clutter that could affect nearby components.

Behaviour under sustained load

Continuous 10 Gbps transfers are limited only by the host controller and attached device; the adapters themselves impose no thermal throttling or signal degradation over time. Gold-plated contacts and shielded construction maintain signal integrity during prolonged heavy I/O, so performance remains consistent whether copying large datasets or streaming high-bandwidth peripherals.

Highlights

  • Connect front-panel USB 3.1 ports with three specialised adapters
  • Type-E female to Type-C male supports 10Gbps data
  • Type-E female to Type-A male supports 10Gbps data
  • Type-E female to Type-E male supports 10Gbps data
  • USB 3.1 header differs from USB 3.0 and is backwards compatible

Specifications

BrandFervit

Questions about this item

How do I connect the Type-E female adapter to my motherboard's USB 3.1 front-panel header without bending the pins?

Align the keyed connector with the 19-pin header, press straight down until the latch clicks, and avoid angling the plug which bends the delicate pins.

Will the gold-plated contacts on the Type-E to Type-C adapter need cleaning or replacement over time?

Gold contacts resist oxidation; occasional compressed-air dusting is enough — no scheduled replacement is required.

At what point does the 10 Gbps link throttle during sustained large-file transfers?

The adapter is rated for 10 Gbps; thermal throttling depends on the host controller and cable length, not the adapter itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.