We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 adapter with SATA and micro SATA connectors plus extra power cable

Fervit

Fervit USB 3.0 to SATA & Micro SATA Adapter for 1.8" & 2.5" HDD with Extra USB Power Cable

SKU CH-TCXP-9490R

Connects 1.8" and 2.5" SATA drives via USB 3.0 up to 5Gb/s with an extra power cable for stable operation

  • Connect 1.8" and 2.5" drives via USB 3.0
  • Up to 5Gb/s transfer speed with Super-Speed USB 3.0
  • Hot-swap and plug-and-play convenience with SATA 2.6 compliance
  • Works with USB 1.0, 1.1, 2.0 and SATA 1.5Gb/s drives
  • Compatible with Windows XP, Vista, 7, 8, Server 2003 and 2008 (32/64-bit)

USB 3.0 SATA Adapter for 1.8" & 2.5" Drives

This Fervit adapter connects 1.8-inch and 2.5-inch SATA hard drives to a USB 3.0 port. It supports Mass Storage Class drives and is backward compatible with USB 1.0, 1.1 and 2.0 ports. The unit complies with Serial ATA Specification Revision 2.6 and includes an extra USB power cable for drives that need additional current.

Build Integration: Hot-Swap Support and Power Cable

The adapter enables hot-swapping and plug-and-play operation so drives can be exchanged without restarting the host system. Its extra USB power cable draws supplementary power from a second USB port when a single port cannot supply enough current. No external power brick is required, freeing a mains socket and reducing cable clutter on the bench.

Sustained Operation: 5 Gb/s Peak Throughput

The Super-Speed USB 3.0 interface delivers a maximum transfer rate of 5 Gb/s during sustained read or write sessions. Backward compatibility with SATA 1.5 Gb/s disks ensures older drives operate at their native speed without bottlenecks. Supported operating systems include Windows XP, Vista, 7, 8, Server 2003 and Server 2008 in both 32-bit and 64-bit editions with the latest service packs.

Highlights

  • Connect 1.8" and 2.5" drives via USB 3.0
  • Up to 5Gb/s transfer speed with Super-Speed USB 3.0
  • Hot-swap and plug-and-play convenience with SATA 2.6 compliance
  • Works with USB 1.0, 1.1, 2.0 and SATA 1.5Gb/s drives
  • Compatible with Windows XP, Vista, 7, 8, Server 2003 and 2008 (32/64-bit)

Specifications

BrandFervit

Questions about this item

Does the USB 3.0 interface sustain its 5Gb/sec maximum during long transfers?

The adapter reaches up to 5Gb/sec on USB 3.0; actual sustained speed depends on the connected drive and host controller.

How much heat or power draw should I expect when the adapter runs all day?

The unit draws power from the USB port and the extra USB power cable; no active cooling is fitted, so it stays cool under normal 2.5" or 1.8" drive loads.

Which operating system must I already have installed for plug-and-play to work?

Windows XP, Vista, 7 or 8 (32-bit or 64-bit) with the latest service packs, plus Server 2003 or 2008 (32-bit or 64-bit).

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.