We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium enclosure cable with USB-C and USB-A plugs for mSATA SSD

Fervit

Fervit USB 3.0 to mSATA SSD Docking Cable Type-C Type-A

SKU CH-KN43-657KZ

Connects a 30x50 mm 68-pin mSATA SSD via USB 3.0 Type-C or Type-A for up to 6 Gbps SATA speeds with UASP and TRIM support

  • Connects mSATA SSDs via USB-C or USB-A
  • Up to 5 Gbps with USB-C Gen1 for fast transfers
  • UASP and TRIM support boosts SSD speed and life
  • Aluminium alloy shell dissipates heat in a slim design
  • Plug-and-play across Windows, Linux and Mac with no drivers

Fervit USB 3.0 to mSATA SSD Docking Cable

This docking cable connects a 68-pin mSATA solid-state drive to a host computer using either a USB Type-C or Type-A interface. It is designed for users who need to access data from standard 30x50mm mSATA drives without installing them internally. The device is bus-powered and requires no external power supply or driver installation across Windows 7 through 11, Linux, and Mac systems. It does not support M.2 SSDs or Mini-PCIe devices.

Sustained transfer with UASP and TRIM support

The integrated controller chipset complies with UASP and TRIM protocols to maintain consistent throughput during extended read or write sessions. Backward compatibility with USB 2.0 limits the connection to 480Mbps on older ports. When used with a USB-C Gen1 5Gbps host, the enclosure can reach the SATA III ceiling of 6Gbps, delivering up to 600MB/s. SATA Gen1 and Gen2 drives operate at 150MB/s and 300MB/s respectively.

Aluminium alloy shell for heat dissipation

The slim aluminium alloy enclosure acts as a passive heatsink, helping to keep the mSATA drive cool during prolonged operation without adding bulk. Its portable form factor makes it convenient for technicians moving between workstations. Dual Type-C and Type-A connectors eliminate the need for separate adapters when switching between modern and legacy USB ports. The plug-and-play design means the drive appears immediately upon connection.

Highlights

  • Connects mSATA SSDs via USB-C or USB-A
  • Up to 5 Gbps with USB-C Gen1 for fast transfers
  • UASP and TRIM support boosts SSD speed and life
  • Aluminium alloy shell dissipates heat in a slim design
  • Plug-and-play across Windows, Linux and Mac with no drivers

Specifications

BrandFervit

Questions about this item

How much heat does the aluminum-alloy shell dissipate when the 6 Gbps SATA Gen3 mSATA drive runs all day?

The aluminum-alloy shell provides excellent heat dissipation for continuous operation.

What mSATA drive must I already own for this cable to work?

You need a standard 30x50 mm 68-pin mSATA SSD in SATA mode; M.2 and Mini-PCIe drives are not supported.

Will the cable work with a SATA Gen1 drive limited to 1.5 Gbps?

Yes, it is backward compatible with SATA Gen1 at 1.5 Gbps and SATA Gen2 at 3.0 Gbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.