We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertical black circuit-board enclosure with USB-C and USB-A cables attached

Fervit

Fervit USB 3.0 to M.2 NVME SATA 2.5 inch enclosure

SKU CH-G4HV-D6BJ8

Connects a 2.5 inch SATA drive or an M.2 NVME drive (2242, 2260, 2280) via USB 3.0 with Type-C and Type-A cables included

  • Supports 2.5 inch SATA SSDs at 5Gbps
  • Handles M.2 NVMe drives at 10Gbps
  • Works with M-Key and B+M M.2 sizes 2242, 2260, 2280
  • Plug-and-play across Windows, Linux, Mac with no drivers
  • Includes Type-C and Type-A cables, reversible Type-C connection

Dual-slot M.2 and 2.5 inch adapter

This Fervit enclosure accepts one M.2 NVME or SATA drive in 2242, 2260 or 2280 sizes and one 2.5 inch SATA drive. It connects to a host via USB 3.0 using the included Type-C and Type-A cables. The unit is bus powered and requires no external supply.

One drive at a time with 10Gbps NVME ceiling

An M.2 NVME drive runs at up to 10Gbps while an M.2 SATA or 2.5 inch SATA drive is limited to 5Gbps. Only one drive operates at once; if both slots are populated the SATA drive takes priority. Hot plugging is not supported so the drive must be swapped with the enclosure disconnected.

Works on Windows 7 through 11, Linux and MAC

Plug-and-play compatibility spans Windows 7, 8, 8.1, 10, 11, Linux and MAC without driver installation. The reversible Type-C cable eases connection orientation. The enclosure does not support 3.5 inch drives, M.2 PCIe AHCI SSDs, mSATA, WiFi cards or capture cards.

Highlights

  • Supports 2.5 inch SATA SSDs at 5Gbps
  • Handles M.2 NVMe drives at 10Gbps
  • Works with M-Key and B+M M.2 sizes 2242, 2260, 2280
  • Plug-and-play across Windows, Linux, Mac with no drivers
  • Includes Type-C and Type-A cables, reversible Type-C connection

Specifications

BrandFervit

Questions about this item

Will this enclosure let me keep using my existing 2.5 inch SATA SSD alongside a new M.2 NVME drive?

The enclosure supports either a 2.5 inch SATA SSD or an M.2 NVME drive, but only one at a time; if both are inserted the SATA drive takes priority.

How can I confirm the M.2 NVME drive is running at the full 10Gbps link after I connect it?

Connect the enclosure to a USB-C Gen 2 10Gbps or USB4 port, then check the negotiated link speed in your operating system’s device manager or system profiler.

Which cables are included and do I need to buy a separate power adapter?

Both a USB-C and a USB-A cable are attached; the unit is bus-powered so no external power supply is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.