We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fervit

Fervit USB 3.0 to Angled SATA 22 Pin Adapter Cable

SKU CH-D65C-35H24

Connects 2.5 and 3.5 inch SATA drives via USB 3.0 with an angled 22 pin adapter, reaching 5 Gb/sec and requiring 12 V power for 3.5 inch models

  • Connect 2.5 and 3.5 inch drives via USB 3.0
  • Reach 5 Gb/sec maximum transfer speed with Super-Speed interface
  • Power 2.5 inch laptop disks directly from the USB port
  • Add DC 12 V 2 A supply for 3.5 inch desktop drives
  • Hot-swap and plug-and-play with SATA 2.0 compliance

USB 3.0 to Angled SATA Adapter

This adapter connects a bare 2.5 inch or 3.5 inch SATA drive to a USB 3.0 port on a desktop or laptop. It provides a simple way to access data from internal drives without installing them inside a case. The angled 22-pin connector eases insertion in tight spaces. The cable is ready to use with no driver installation required.

Suits drive recovery and external access

It suits users who need to read or write a SATA drive occasionally, such as during data recovery or OS migration. It is not for builders who want a permanent internal connection or who need to power a 3.5 inch drive without a separate 12 V 2 A supply with a 5.5x2.1 mm plug. Laptop drives run from the USB port alone.

USB 3.0 transfer rate up to 5 Gb/s

The single specification that decides fit is the USB 3.0 interface with a maximum transfer rate of 5 Gb/s. This sets the real-world speed ceiling for any attached SATA drive. The adapter complies with SATA revision 2.0 and supports hot-swapping and plug-and-play operation.

Highlights

  • Connect 2.5 and 3.5 inch drives via USB 3.0
  • Reach 5 Gb/sec maximum transfer speed with Super-Speed interface
  • Power 2.5 inch laptop disks directly from the USB port
  • Add DC 12 V 2 A supply for 3.5 inch desktop drives
  • Hot-swap and plug-and-play with SATA 2.0 compliance

Specifications

BrandFervit

Questions about this item

Does the angled 22 pin SATA connector on this adapter fit both 2.5 and 3.5 inch drives?

Yes, the angled 22 pin SATA connector mates with both 2.5 and 3.5 inch Mass Storage Class drives.

When installing a 3.5 inch desktop drive, which power supply must be connected first to avoid the drive not spinning up?

Connect the external DC 12 V 2 A power adapter with its 5.5 x 2.1 mm plug to the adapter before attaching the USB 3.0 cable to the host.

How often should the 5.5 x 2.1 mm DC power jack on this adapter be inspected for wear when used daily with a 3.5 inch drive?

Check the DC power jack every few months for looseness or bent pins, as repeated insertion can degrade the connection over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.