Fervit
Fervit USB 3.0 Micro B 90° Left Angled Dual Screw Cable 1.2M
A USB 3.0 Micro B cable with a 90° left-angled dual-screw connector for secure tethered camera connections, 1.2 m long
- 90° left-angled connector keeps the cable clear while shooting tethered
- Dual screw locks secure the Micro B plug on industrial cameras
- USB 3.0 A to Micro B interface supports 3.0 data speeds
- 2 m length gives comfortable reach for studio setups
- Purpose-built for photographers using new cameras
Tethered Shooting Cable
This 1.2 metre USB 3.0 cable connects a camera with a Micro B port to a computer using a standard Type A plug. It is built for photographers who shoot tethered and need a reliable data link during sessions. The left angled connector routes the cable away from the grip for a natural shooting feel.
Dual Screw Locking Upgrade
The Micro B end adds dual screw threads that lock into compatible camera ports, replacing friction-only cables that can pull loose when the camera moves. The jump is worth it whenever a disconnected cable would cost a shot or interrupt a live view feed.
Tool Free Installation
Both ends are male plugs that seat by hand; the screws tighten with fingers so no driver is needed. The only common issue is attempting to force the angled Micro B hood into a recessed port that does not accept the 90 degree orientation.
Highlights
- 90° left-angled connector keeps the cable clear while shooting tethered
- Dual screw locks secure the Micro B plug on industrial cameras
- USB 3.0 A to Micro B interface supports 3.0 data speeds
- 2 m length gives comfortable reach for studio setups
- Purpose-built for photographers using new cameras
Specifications
| Brand | Fervit |
|---|
Questions about this item
How much clearance does the 90° left-angled Micro B connector need behind the camera port?
The 90° left angle projects the cable sideways from the Micro B port, so allow enough depth for the dual-screw collar to seat fully without pressing against the camera body or rig.
What is the correct sequence for securing the dual screws on the Micro B end during installation?
Align the Micro B plug squarely, start both screws by hand to avoid cross-threading, then tighten them alternately a little at a time until the connector is firm and the angle sits naturally.
Which parts of the cable are most likely to need replacement after repeated tethered shoots?
The 1.2 m cable jacket and the dual-screw Micro B connector endure the most flex and connect-disconnect cycles, so inspect them regularly for wear or stripped threads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



