We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black panel with two blue USB 3.0 Type-A ports, screw holes, and a 50cm cable ending in a 20-pin header

Fervit

Fervit USB 3.0 Dual Type-A Panel to 20/19-Pin Header Cable 50cm

SKU CH-0JH9-8CDAE

Adds two panel-mount USB 3.0 Type-A ports to a motherboard 20- or 19-pin header with a 50 cm cable, delivering up to 5 Gbps throughput

  • Adds two front-panel USB 3.0 ports from a single 20-pin header
  • 5 Gbps throughput with USB 3.0 host and device
  • Panel-mount design with two screw holes for secure installation
  • 50 cm cable length fits standard chassis layouts
  • Backwards compatible with USB 2.0 devices

Panel-mount USB 3.0 adapter for front-panel upgrades

This Fervit cable converts a single motherboard 20-pin header into two panel-mounted Type-A ports. It suits builders adding front-panel USB 3.0 connectivity to a chassis or replacing a damaged header cable. The 50 cm length reaches most front-panel cut-outs.

Screw-mount installation with keyed header fit

Two screw holes on the female bracket secure the panel to the chassis cut-out. The 19-pin plug inserts one way into the 20-pin header, preventing reversed connection. No drivers are required; the link is passive and recognised by any compliant host.

Check header pin-count and panel cut-out dimensions

Verify that your motherboard provides a 20-pin USB 3.0 header, not the older 19-pin variant. Ensure the chassis front panel has a rectangular opening that matches the bracket screw spacing. The cable does not add ports beyond the two Type-A sockets shown.

Highlights

  • Adds two front-panel USB 3.0 ports from a single 20-pin header
  • 5 Gbps throughput with USB 3.0 host and device
  • Panel-mount design with two screw holes for secure installation
  • 50 cm cable length fits standard chassis layouts
  • Backwards compatible with USB 2.0 devices

Specifications

BrandFervit

Questions about this item

How do I confirm the panel is delivering USB 3.0 speed after I mount it?

Connect a USB 3.0 device to one of the two Type-A ports and verify the link negotiates at 5Gbps in your OS device manager or benchmark tool.

What does the 50cm cable kit include and is anything else required?

The kit provides a dual Type-A panel bracket with two screw holes and a single 20-pin header plug; no extra parts are needed if your motherboard has a 20-pin or 19-pin USB 3.0 header.

Should I choose the 20-pin or 19-pin header version for my board?

The supplied cable ends in a 20-pin connector that also fits 19-pin headers, so one version covers both motherboard layouts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.