We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black adapter with a 20-pin USB 3.0 socket and a vertical USB 3.1 header

Fervit

Fervit USB 3.0 20Pin to USB 3.1 Header Adapter

SKU CH-DG3F-SN0KG

Converts a motherboard USB 3.0 20-pin header into a USB 3.1 front-panel header for case ports

  • Converts a USB 3.0 header to USB 3.1 for front-panel ports
  • Supports up to 5 GBit/s throughput on the adapted connection
  • Plugs directly into any 20-pin USB 3.0 header with no extra parts
  • Enables USB 3.1 Type-A or Type-C case connectors on boards lacking a native header
  • Works with AM4 and Intel 2066 platforms that only provide USB 3.0 headers

USB 3.0 to 3.1 header adapter

This compact adapter converts a motherboard USB 3.0 20-pin header into a USB 3.1 front-panel header. It lets a case with a USB 3.1 Type-A or Type-C port run at full specification even when the board lacks a native 3.1 header. The device plugs directly into the existing header without cables or brackets. It is aimed at builders upgrading front-panel connectivity on older or entry-level platforms.

Thermals noise and power

The adapter is a passive electrical converter with no active components, fans or firmware. It draws no additional power beyond the signalling lines provided by the motherboard header. In normal use it produces no audible noise and adds no measurable heat to the system. Operation stays within the 5 GBit/s signalling budget of the USB 3.1 Gen 1 link.

What the bundle changes

No software, drivers or mounting hardware are included or required. The sole change is electrical: a case USB 3.1 port gains a live connection instead of falling back to USB 2.0 or remaining unused. This enables full 5 GBit/s throughput for external drives or peripherals plugged into that front-panel port.

Highlights

  • Converts a USB 3.0 header to USB 3.1 for front-panel ports
  • Supports up to 5 GBit/s throughput on the adapted connection
  • Plugs directly into any 20-pin USB 3.0 header with no extra parts
  • Enables USB 3.1 Type-A or Type-C case connectors on boards lacking a native header
  • Works with AM4 and Intel 2066 platforms that only provide USB 3.0 headers

Specifications

BrandFervit

Questions about this item

How do I install the Fervit USB 3.0 20Pin to USB 3.1 Header Adapter, and what step is often missed?

Plug the compact converter directly into any motherboard USB 3.0 20-pin header that supplies two USB 3.0 lanes; the step often missed is confirming the header actually provides both lanes so the adapter can deliver a full USB 3.1 port.

What maintenance or replacement will this adapter need later?

No routine maintenance is required; the overmolded connectors are passive and only need replacement if physical damage occurs to the header pins or the USB 3.1 front-panel socket.

What limit appears first under sustained use of this adapter?

The 5 GBit/s throughput ceiling of the USB 3.1 connection is the first limit reached during continuous high-bandwidth transfers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.