Fervit
Fervit USB 3.0 20Pin 19Pin Male Low Profile Right Angled to Female Extension Cable 90 Degree 24cm
Extends a motherboard 19‑pin or 20‑pin USB 3.0 header to a female port with a low‑profile 90‑degree right‑angled plug, 24 cm long, supporting 5 Gbps two‑way data transfer
- 5 Gbps throughput with USB 3.0 host and device
- Two-way simultaneous data transfer for 19-pin and 20-pin headers
- Direct insertion without extra adapters or attachments
- Low-profile 90-degree right-angle design saves space in tight builds
- 24 cm cable length for short internal routing
Low-Profile 20-Pin USB 3.0 Extension
This 24 cm cable adds a right-angled female port to a motherboard 19-pin or 20-pin USB 3.0 header. It supports 5 Gbps throughput when paired with a USB 3.0 host and device. The low-profile angled design saves space inside tight chassis layouts. No extra adapters are required for installation.
Header Keying and Clearance Check
Verify that your motherboard header is a 19-pin or 20-pin USB 3.0 type before ordering. The key position on the header determines which direction the angled connector will face. Ensure there is enough room around the header for the 90-degree bend to sit flat without stressing the pins.
Replaces Straight Header Cables in Cramped Builds
This cable upgrades from a straight header cable when clearance around the motherboard USB 3.0 header is limited. The jump is worth it in small-form-factor cases or when large components block a straight connector. It is not for builders who need a longer reach or a different header pin count.
Highlights
- 5 Gbps throughput with USB 3.0 host and device
- Two-way simultaneous data transfer for 19-pin and 20-pin headers
- Direct insertion without extra adapters or attachments
- Low-profile 90-degree right-angle design saves space in tight builds
- 24 cm cable length for short internal routing
Specifications
| Brand | Fervit |
|---|
Questions about this item
Does the 24 cm cable include both the 20-pin male and 19-pin male connectors, or must I buy a separate adapter?
The cable has a single male connector that fits either a 20-pin or 19-pin motherboard header and a female USB 3.0 port on the other end, so no extra adapter is required.
Should I choose the 20-pin or 19-pin version for my motherboard header?
One cable fits both header types; the key position on your motherboard decides the insertion direction, so select the single version listed.
Will the 5 Gbps rating be reached on a USB 3.0 front-panel port?
Yes, when the host and device both support USB 3.0 the cable delivers up to 5 Gbps throughput.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


