We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue right-angled USB 3.0 cable with 20-pin male and 19-pin female connectors

Fervit

Fervit USB 3.0 20Pin 19Pin Male-Female 90 Degree Extension Cable

SKU CH-Z840-HP8V7

Right-angled 20-pin 19-pin USB 3.0 male-to-female extension cable delivers 5 Gbps speeds and fits tight motherboard headers

  • Fits tight motherboard headers with 90 degree angled connector
  • Reaches 5Gbps throughput, ten times faster than USB 2.0
  • Enables simultaneous two-way data transfer for efficient I/O
  • Extends 20Pin or 19Pin USB 3.0 headers without signal loss
  • Right-angle design solves clearance issues in compact builds

Right-Angled USB 3.0 Header Extension

This 90-degree cable connects a 20-pin or 19-pin USB 3.0 header on a motherboard to a matching female connector. It is designed for system builders and upgraders who need to route the internal USB link around tight clearances near the board edge or large components. The right-angle plug lets the cable sit flat against the PCB, reducing strain on the header pins. Super-speed signalling up to 5 Gbps is supported, which is 10 times faster than USB 2.0.

Installation Notes

Push the male end straight onto the motherboard header until the latch clicks; the 90-degree bend then directs the cable parallel to the board surface. Because the connector is keyed, it only fits one way — forcing it can bend the delicate header pins. The female end accepts a standard internal USB 3.0 plug from a front-panel module or add-in card. Two-way data transmission works simultaneously, so no extra configuration is required once both sides are seated.

Pre-Order Checks

Verify that your motherboard exposes a 20-pin or 19-pin USB 3.0 header; some boards label it as JUSB3 or F_USB3. Confirm the header pin count matches the cable — 19-pin headers omit the key pin but are electrically compatible. Ensure there is enough room behind the header for the right-angle body to clear nearby capacitors, voltage-regulator heatsinks or a large CPU cooler. The cable carries signal only; it does not supply auxiliary power to external devices.

Highlights

  • Fits tight motherboard headers with 90 degree angled connector
  • Reaches 5Gbps throughput, ten times faster than USB 2.0
  • Enables simultaneous two-way data transfer for efficient I/O
  • Extends 20Pin or 19Pin USB 3.0 headers without signal loss
  • Right-angle design solves clearance issues in compact builds

Specifications

BrandFervit

Questions about this item

How can I verify the cable is delivering 5 Gbps after connecting it to the 20-pin header?

Check the host controller panel or device manager; a USB 3.0 link should report SuperSpeed at 5 Gbps and show two-way traffic flowing simultaneously.

What comes in the package and is any adapter needed for a 19-pin header?

The box contains the 90-degree male-to-female extension cable; the same connector fits both 20-pin and 19-pin motherboard headers so no extra adapter is required.

Should I choose the 20-pin or 19-pin version for my motherboard?

This single cable works with either header type; select it when your board has a 20-pin or 19-pin USB 3.0 internal connector and you need a right-angled fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.