We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter with dual 19/20-pin and Type-E headers plus SATA power connector

Fervit

Fervit USB 3.0 19/20Pin to Dual 19/20Pin & Type-E Adapter with SATA Power

SKU CH-QY6R-7BNWB

Connects a motherboard Type-E or 19/20-pin USB 3.0 header to two front-panel ports with SATA power for 5 Gbps speeds

  • Splits one header into dual USB 3.0 19/20Pin and Type-E ports
  • Delivers up to 5Gbps throughput for fast front-panel transfers
  • Includes SATA power cable for stable dual-port operation
  • Supports simultaneous two-way data on both connected devices
  • Works with most USB 3.0 front panels, hubs and card readers

Front-panel USB 3.0 expansion

This Fervit adapter splits a single motherboard USB 3.0 19/20-pin or Type-E header into two downstream ports, one 19/20-pin and one Type-E. It is designed for builders who need to connect multiple front-panel USB 3.0 devices such as hubs, card readers or additional I/O brackets from one internal header.

Passive thermals and SATA power

The unit draws supplementary power from a standard SATA connector, allowing both downstream ports to operate at the 5 Gbps USB 3.0 rate without loading the motherboard header. No active cooling is present, so the adapter runs silently and adds negligible heat inside the chassis.

Build integration

Installation requires a free USB 3.0 19/20-pin or Type-E motherboard header and an available SATA power lead from the power supply. The splitter frees the second motherboard header for other uses while supporting two front-panel USB 3.0 devices simultaneously. Builders needing more than two internal USB 3.0 connections will require an additional controller or hub.

Highlights

  • Splits one header into dual USB 3.0 19/20Pin and Type-E ports
  • Delivers up to 5Gbps throughput for fast front-panel transfers
  • Includes SATA power cable for stable dual-port operation
  • Supports simultaneous two-way data on both connected devices
  • Works with most USB 3.0 front panels, hubs and card readers

Specifications

BrandFervit

Questions about this item

How do I install the Fervit adapter and which step is often missed?

Plug the adapter into a motherboard Type-E or USB 3.0 19/20-pin header, then connect the included SATA power cable to your PSU — forgetting the SATA power link is the common mistake.

What maintenance or replacement will this adapter need later?

No routine maintenance is required; if a header or the SATA power lead fails, replace the whole adapter.

What limit appears first under sustained use?

The 5 Gbps USB 3.0 bandwidth ceiling shared across both 19/20-pin and Type-E outputs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.