Fervit
Fervit USB 3.0 19/20-pin & Type-E to Dual Port PCIe Bracket
Converts internal 19/20-pin and Type-E headers to external USB 3.0 Type-A and USB-C ports at 5Gbps via a 12cm PCIe bracket with 50cm cables
- Converts 19/20-pin and Type-E headers to external USB 3.0 Type-A and USB-C ports via 12cm PCIe bracket
- Delivers 5Gbps per port on both Type-A and Type-C with backward compatibility to USB 2.0 and 1.1
- Extends internal motherboard ports to rear I/O panel with 50cm cable for easy device access
- USB-C port handles data only — no video, audio, Power Delivery or DisplayPort Alt Mode
- Fits standard USB 3.0 19/20-pin and Type-E headers for tight spaces and cabinet-mounted devices
Dual-Port Bracket Converts Internal Headers
This new Fervit bracket converts internal motherboard USB 3.0 19/20-pin and USB 3.1 Type-E headers into external USB 3.0 Type-A and USB-C ports via a standard 12cm PCIe rear bracket. It provides 5Gbps data transfer per port with backward compatibility to USB 2.0 and 1.1 speeds of 480Mbps and 1.5Mbps. A 50cm cable links the internal headers to the bracket for flexible routing inside the case. The adapter is designed for tight spaces and cabinet-mounted devices needing external USB access.
Builders Adding Front-Panel Ports To Rear I/O
This bracket suits system builders who want to move internal USB 3.0 and Type-E headers to the rear I/O panel for external SSDs, HDDs or phones. It fits motherboards with standard 19/20-pin and Type-E connectors and installs in a single PCIe slot. Buyers needing video output, audio transmission or Power Delivery from the USB-C port should choose a different solution because this adapter handles data only. It also does not add extra internal headers or increase the number of motherboard connections.
USB-C Port Is Data Only No PD Or Video
The single specification that decides fit is the USB-C port's data-only design. It strictly transmits data at up to 5Gbps and does not support Power Delivery, DisplayPort Alt Mode or any video or audio output. If the build requires charging devices, driving a monitor or delivering power through the USB-C connection, this bracket will not meet that need. For pure storage and peripheral data transfer the dual-port bracket provides a direct internal-to-external link.
Highlights
- Converts 19/20-pin and Type-E headers to external USB 3.0 Type-A and USB-C ports via 12cm PCIe bracket
- Delivers 5Gbps per port on both Type-A and Type-C with backward compatibility to USB 2.0 and 1.1
- Extends internal motherboard ports to rear I/O panel with 50cm cable for easy device access
- USB-C port handles data only — no video, audio, Power Delivery or DisplayPort Alt Mode
- Fits standard USB 3.0 19/20-pin and Type-E headers for tight spaces and cabinet-mounted devices
Specifications
| Brand | Fervit |
|---|
Questions about this item
How do I fit the 12cm bracket and 50cm cable into my case, and what header mistake should I avoid?
Mount the 12cm PCIe bracket in a rear slot, route the 50cm cable to the motherboard, and plug the 19/20-pin connector into the USB 3.0 header and the Type-E plug into the USB 3.1 Type-E header — do not force the 19/20-pin block into a USB 2.0 header.
Will the ports degrade or need replacement after heavy daily use?
The bracket is a passive mechanical adapter with no active electronics, so there are no wearable components; only the cable or connectors would need replacement if physically damaged.
What is the first bottleneck when I run large file transfers on both ports at once?
Each port is limited to 5Gbps SuperSpeed, and both share the single internal header bandwidth, so sustained simultaneous transfers will hit that 5Gbps ceiling per port.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



