Fervit USB 2.0 Type-A Male to Female 90° Angled Extension Cable 20cm 2pcs

USB 2.0 angled extension pair

This set includes one left-angled and one right-angled cable, each 20 cm long, with a USB 2.0 Type-A male plug and a female socket. It is intended for users who need to route a USB connection around tight corners or behind equipment where a straight plug will not fit. The 90° bend keeps the cable close to the chassis, reducing strain on the port and preventing accidental disconnection in cramped setups. The pair covers both left and right orientations for flexible routing.

Sustained 480 Mbps data and 5 V 2 A power

When connected to a USB 2.0 host and device, the cables maintain a throughput of up to 480 Mbps for continuous transfers such as backups or media streaming. The conductors also support up to DC 5 V 2 A for charging phones, powering portable drives or running bus-powered peripherals without voltage drop over the short 20 cm run. Standard 2.0 connectors provide stable electrical contact during prolonged use, so performance does not degrade as the cable warms. Both data and power limits are governed by the USB 2.0 specification rather than the cable itself.

USB 2.0 interface limits

The USB 2.0 standard caps signalling at 480 Mbps and bus power at 5 V 2 A, so the cables cannot deliver SuperSpeed bandwidth or higher charging currents even if the host supports them. Length is fixed at 20 cm, which keeps voltage loss minimal but prevents reaching distant ports without an additional hub or active extender. The angled Type-A plugs only mate with Type-A receptacles; they are incompatible with Type-C, Micro-B or Mini-B ports. Buyers needing longer reach, USB 3.x speeds or alternative connector types must choose a different product.