Fervit
Fervit USB 2.0 On/Off Power Switch Cable Type-A to DC 5.5x2.1mm
A USB 2.0 power cable with an inline on/off switch and a 5.5×2.1 mm DC plug for 5 V devices up to 3 A
- Power on/off without unplugging via inline button
- Connects USB-A to 5.5×2.1 mm DC devices
- Supports up to 5 V 3 A for low-power gear
- No data transfer — power-only two-core cable
- Extends reach for lamps, fans, cameras, more
USB 2.0 power switch cable for DC devices
This Fervit cable connects a USB Type-A port to a 5.5 mm by 2.1 mm DC plug and includes an inline on/off button. It is designed for low-power peripherals such as LED lamps, small fans or dashboard cameras that draw up to 5 V 3 A. The cable carries power only and cannot transfer data.
Behaviour under sustained load
The two-core conductors are rated for a maximum of 5 V 3 A and do not support any fast-charging protocol. Continuous operation at the rated current is within specification for the intended small appliances, but the cable must not be used with high-power equipment or plugged directly into a Power Delivery charger. The switch simply interrupts the DC line without active electronics.
5.5 mm by 2.1 mm DC connector fit
Compatibility depends entirely on the target device using a centre-positive 5.5 mm outer and 2.1 mm inner DC barrel jack. Buyers whose equipment uses a different barrel size, a locking connector or a proprietary power port cannot use this cable. No adapter is included.
Highlights
- Power on/off without unplugging via inline button
- Connects USB-A to 5.5×2.1 mm DC devices
- Supports up to 5 V 3 A for low-power gear
- No data transfer — power-only two-core cable
- Extends reach for lamps, fans, cameras, more
Specifications
| Brand | Fervit |
|---|
Questions about this item
Does the on/off switch stay cool and quiet when the cable powers a 5 V 3 A load all day?
The cable carries only DC 5 V power up to 3 A and has no active components, so the switch itself generates no audible noise or noticeable heat during continuous use.
What must I already own to use this Fervit USB 2.0 switch cable with a DC 5.5 × 2.1 mm device?
You need a standard USB Type-A port that supplies 5 V and a device fitted with a 5.5 mm outer / 2.1 mm inner DC barrel jack.
Will the switch cable work with an older 5 V desk lamp that has a 5.5 × 2.1 mm input?
Yes, the cable delivers plain 5 V DC power up to 3 A and the inline switch lets you turn the lamp on and off without unplugging it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



