Fervit
Fervit USB 2.0 Motherboard 9pin 10pin Header to Mini USB 5Pin Cable 50cm
Connects a motherboard 9-pin or 10-pin header to Mini USB devices at 480 Mbps over 50 cm
- Plug-and-play internal USB 2.0 header to Mini USB adapter
- 50 cm cable fits tight chassis spaces
- 480 Mbps data rate for fast accurate transfers
- Powers Mini Monitor, Sensor Panel, Camera and more
- Converts 9-pin or 10-pin motherboard port to Micro USB device
Internal USB 2.0 to Mini USB Adapter
This 50cm cable converts a motherboard 9pin or 10pin header to a Mini USB 5pin connector. It enables internal USB 2.0 connectivity for devices such as mini monitors, sensor panels, or cameras. The link runs at 480 Mbps with standard 2.0 electrical performance. Fully plug and play with no drivers required.
Upgrade from loose front-panel wiring
Replaces improvised header-to-device cables that clutter tight chassis spaces. The fixed 50cm length keeps routing clean in small-form-factor builds. The jump is worth it when a device needs a dedicated internal Mini USB port and the front-panel header is already occupied. Builders who need longer reach or multiple device taps should look elsewhere.
Check header pinout and device port
Verify the motherboard manual labels the internal header as 9pin or 10pin USB 2.0 before ordering. Confirm the target device uses a Mini USB 5pin socket, not Micro USB or USB-C. Ensure 50cm spans the distance from header to device mount point. No additional power or software configuration is needed.
Highlights
- Plug-and-play internal USB 2.0 header to Mini USB adapter
- 50 cm cable fits tight chassis spaces
- 480 Mbps data rate for fast accurate transfers
- Powers Mini Monitor, Sensor Panel, Camera and more
- Converts 9-pin or 10-pin motherboard port to Micro USB device
Specifications
| Brand | Fervit |
|---|
Questions about this item
Will the 10-pin header on this cable fit my motherboard's 9-pin USB 2.0 connector?
The cable provides both a 9-pin and a 10-pin header, so it matches the standard internal USB 2.0 pinout found on most motherboards.
Do I need drivers or BIOS changes to install this 50cm internal USB cable?
No, the cable is fully plug-and-play; just connect the header to the motherboard and the Mini USB 5-pin end to your device.
How often should I replace this 480 Mbps USB 2.0 cable in a sensor panel setup?
Replace it only if the connectors become loose or the cable shows physical damage; there is no scheduled replacement interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



