Fervit
Fervit USB 2.0 Mini-B 5pin 90° Left Angled Male to USB-A Male Cable 1.8m
A 1.8 m USB 2.0 cable with a 90° left-angled Mini-B 5-pin connector for cameras and portable drives
- 90° left-angled mini-B plug fits tight spaces
- USB 2.0 interface connects cameras and portable drives
- 8 m length gives flexible desk routing
- Nickel-plated contacts resist corrosion and signal loss
- AWG 28 conductors deliver reliable data and power
What this cable does
This Fervit cable connects a USB 2.0 Type-A port to a Mini-B 5-pin port. The Mini-B end is angled 90 degrees to the left, which helps it fit in tight spaces around cameras or portable drives. It is built for data transfer and charging at USB 2.0 speeds.
Installing the cable
Plug the Type-A end into the host and the angled Mini-B end into the device; no drivers are required. The left-angle orientation is fixed, so verify the port layout on your device before ordering — a right-angled or straight connector will not swap in. The nickel-plated contacts resist corrosion from repeated insertion.
The specification that decides fit
The cable is 1.8 metres long and uses 28 AWG conductors for both data and power lines. That length suits desktop setups but may be short for rack-mounted gear. Devices needing a Mini-B 5-pin connection with a left-angle plug will work; those requiring Micro-B, USB-C or a straight Mini-B plug will not.
Highlights
- 90° left-angled mini-B plug fits tight spaces
- USB 2.0 interface connects cameras and portable drives
- 8 m length gives flexible desk routing
- Nickel-plated contacts resist corrosion and signal loss
- AWG 28 conductors deliver reliable data and power
Specifications
| Brand | Fervit |
|---|
Questions about this item
How can I confirm the cable is functioning correctly after connecting it?
The nickel-plated connectors should seat firmly; a connected camera or mobile HDD will be recognised by the host and transfer data at USB 2.0 speeds.
What comes in the package and is anything else required?
The box contains the 1.8 m USB 2.0 A male to mini-B 5-pin 90° left-angled cable only; no additional adapters or drivers are needed for supported devices.
Which length should I choose for my setup?
This model is supplied in a single 1.8 m (180 cm) length with AWG 28 data and power lines; select it when that reach matches the distance between your USB-A port and the mini-B device.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


