We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black cable with wide eSATAp plug on one end and L-shaped 22-pin SATA connector on the other

Fervit

Fervit USB 2.0 eSATAp to 22-Pin SATA Dual Power Cable 50cm

SKU CH-7DJA-Y39X4

Connects 2.5 or 3.5 SATA drives to an eSATAp port with 5 V or 12 V power over a 50 cm cable

  • Connect 2.5 or 3.5 SATA drives externally via eSATAp port
  • Dual 5 V and 12 V power from eSATAp gold contacts
  • No separate power adapter needed for 2.5 or 3.5 HDDs
  • 50 cm cable length for flexible drive placement
  • Works with 5 V eSATAp ports for 2.5 drives only

Connect 2.5" or 3.5" SATA drives via eSATAp

This cable links a 22-pin SATA hard drive to a Power Over eSATA port on a notebook or PC. It carries both data and either 5 V or 12 V power through the eSATAp connector. The 50 cm length suits desktop or bench use. No separate power adapter is needed when the host port supplies 12 V.

Suits users with an eSATAp port that delivers 12 V

Builders whose eSATAp port only provides 5 V can run 2.5" drives but should not connect a 3.5" drive directly. Anyone lacking an eSATAp port, or needing USB-only connectivity, should look at a different adapter. The cable does not add an eSATAp port to a system without one.

Single 50 cm cable with 22-pin SATA and eSATAp ends

The 0.5 m cable terminates in a 22-pin SATA plug for the drive and an eSATAp plug for the host. It supports both 5 V and 12 V delivery depending on the host port capability. Verify your port supplies 12 V before attaching a 3.5" drive.

Highlights

  • Connect 2.5 or 3.5 SATA drives externally via eSATAp port
  • Dual 5 V and 12 V power from eSATAp gold contacts
  • No separate power adapter needed for 2.5 or 3.5 HDDs
  • 50 cm cable length for flexible drive placement
  • Works with 5 V eSATAp ports for 2.5 drives only

Specifications

BrandFervit

Questions about this item

What comes in the box and do I need any extra cables or power adapters?

The box contains the 50 cm eSATAp to 22-pin SATA cable only. No separate power adapter is required when the host port supplies 12 V for 3.5" drives or 5 V for 2.5" drives.

How do I decide whether my port can run a 3.5" drive or only a 2.5" drive?

Check if the eSATAp port provides 12 V via its two gold contacts; 12 V supports both 2.5" and 3.5" drives, while a 5 V-only port will run 2.5" drives alone.

What does the USB 2.0 label mean for actual transfer speed when the drive is connected?

The cable uses the eSATA data path, so the USB 2.0 reference only describes the combo port type; real throughput depends on the drive and the host eSATA controller, not on USB 2.0 limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.