We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter cable with USB 2.0 header plug and USB 3.1 Type-E socket

Fervit

Fervit USB 2.0 9Pin 10Pin to USB 3.1 Type-E Adapter 0.15M

SKU CH-X9SJ-D0VF0

Converts a motherboard USB 2.0 9-pin or 10-pin header into a USB 3.1 Type-E front-panel connector supporting 480 Mbps data

  • Converts a USB 2.0 9-pin 10-pin header to a USB 3.1 Type-E front-panel socket
  • Supports USB 2.0 data rates up to 480 Mbps from SSDs or HDDs
  • Compact plug-in design fits directly into any USB 2.0 header without extra attachments
  • No audio, video, docking, Power Delivery or DisplayPort alt-mode functionality
  • 15 m cable length for tidy internal routing

USB 2.0 header to Type-E adapter

This adapter converts a motherboard USB 2.0 9-pin 10-pin header into a USB 3.1 Type-E front-panel connector. It is intended for builders who have a spare USB 2.0 header but need a Type-E port for a modern case front panel. The compact plug inserts directly without extra brackets or cables. It suits systems where the board lacks a native USB 3.1 header.

Type-E port limited to USB 2.0 speeds

The Type-E socket delivers USB 2.0 data rates up to 480Mbps when connected to an SSD or HDD. It does not carry audio, video or docking signals. Power Delivery and DisplayPort alt mode are not supported. The adapter simply rewires the existing 2.0 lanes to the newer physical connector.

USB 2.0 bandwidth caps the link

Because the source is a USB 2.0 header, the link cannot exceed 480Mbps regardless of the Type-E form factor. USB 3.0, 3.1 or 3.2 throughput is unavailable on this connection. Builders who need full SuperSpeed rates must use a native USB 3.0 or later header. The 0.15M length keeps the signal path short but does not change the bandwidth limit.

Highlights

  • Converts a USB 2.0 9-pin 10-pin header to a USB 3.1 Type-E front-panel socket
  • Supports USB 2.0 data rates up to 480 Mbps from SSDs or HDDs
  • Compact plug-in design fits directly into any USB 2.0 header without extra attachments
  • No audio, video, docking, Power Delivery or DisplayPort alt-mode functionality
  • 15 m cable length for tidy internal routing

Specifications

BrandFervit

Questions about this item

Will the 9-pin or 10-pin header connector wear out and need replacement?

The compact adapter plugs directly into any USB 2.0 header with no extra attachments, so there are no moving parts or cables to degrade under normal use.

What speed ceiling appears first when I run sustained transfers through the Type-E port?

The Type-E port is limited to USB 2.0 signalling at 480Mbps, so that throughput ceiling is reached immediately and does not change with sustained load.

Does the adapter add noticeable heat or power draw when left running all day?

It draws power only from the motherboard header and has no active components, so heat and power impact are negligible during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.