We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black PCB adapter with one 9-pin header and two USB 3.1 Type-E ports, short cable

Fervit

Fervit USB 2.0 9-Pin to Dual USB 3.1 Type-E Adapter .49ft

SKU CH-0FWR-S677A

Converts a USB 2.0 motherboard header into a dual USB 3.1 Type-E front-panel socket delivering up to 480Mbps data

  • Converts a USB 2.0 header into a USB 3.1 Type-E port
  • Delivers up to 480 Mbps data transfer for SSDs or HDDs
  • Adds front-panel USB-C connectivity to boards lacking native support
  • Vertical orientation avoids interference with nearby components
  • Multi-layer PCB with differential signal optimization maintains stable transmission

Header Conversion

This adapter converts a motherboard USB 2.0 9-pin header into two USB 3.1 Type-E ports. It targets builders whose boards lack a native USB-C front-panel connector. The device plugs directly into the existing header without extra brackets or cables. It suits upgrades where internal USB-C access is needed for external storage docks or flash drives.

Build and Mounting

The compact vertical PCB inserts straight into any standard USB 2.0 header, clearing surrounding components. A multi-layer board with differential signal optimisation maintains stable transmission at USB 2.0 speeds. Each Type-E female socket accepts a front-panel cable or internal device, adding two ports from a single header. No external power or mounting hardware is required.

Limitations and Use

The Type-E ports deliver up to 480 Mbps USB 2.0 data only; they do not carry audio, video, DisplayPort alt mode or Power Delivery. Connected SSDs or HDDs will operate at USB 2.0 throughput, not USB 3.1 rates. Buyers who need full USB 3.1 bandwidth, video output or charging negotiation must use a motherboard with a native USB 3.1 header. No driver or software bundle is included.

Highlights

  • Converts a USB 2.0 header into a USB 3.1 Type-E port
  • Delivers up to 480 Mbps data transfer for SSDs or HDDs
  • Adds front-panel USB-C connectivity to boards lacking native support
  • Vertical orientation avoids interference with nearby components
  • Multi-layer PCB with differential signal optimization maintains stable transmission

Specifications

BrandFervit

Questions about this item

What speed does the USB 3.1 Type-E port actually deliver when connected to a USB 2.0 header?

The Type-E port is limited to USB 2.0 signalling, so data tops out at 480 Mbps even though the connector is a USB 3.1 Type-E key-A female.

Does this adapter need any extra brackets or cables to mount in a standard case front-panel cut-out?

No. The compact PCB plugs straight into any 9-pin USB 2.0 motherboard header and sits vertically without interfering with neighbouring headers.

Which orientation do I plug the 9-pin connector onto the motherboard header to avoid bent pins?

Align the missing-pin key on the adapter with the blocked hole on the 9-pin header, then press straight down — forcing it the wrong way bends the header pins.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.