Fervit
Fervit Ultra Flat Slim USB 3.0 Type-A Male to Male Extension Cable Blue 60cm
Flat USB 3.0 extension cable adds 60 cm of reach for SSDs and cameras at up to 5 Gbps
- Transfers data at up to 5Gbps with USB 3.0 host and device
- Extends reach by 60cm for SSDs, cameras and other USB 3.0 gear
- Gold-plated connectors and welded ends resist damage from tugs
- Flat tangle-free jacket and aluminium shell stay tidy in a bag
- Single-piece moulded build withstands daily plugging and unplugging
USB 3.0 Type-A male-to-male extension
This Fervit cable adds 60 centimetres of reach between a USB 3.0 host and a Type-A device such as an external SSD or camera. Gold- and silver-plated contacts and a welded, single-piece moulded construction resist damage from accidental pulls. The flat, tangle-free jacket and blue aluminium alloy shell keep the cable light and easy to route.
Replaces short or worn USB 3.0 cables
Swap it in when the original lead is too short for your desk layout or when an older cable limits transfer speed. The jump is worth it whenever you need the full 5 Gbps throughput of USB 3.0 instead of the 10 times slower USB 2.0 rate. It does not add extra ports or convert connector types.
Check host and device ports before ordering
Both ends are standard USB 3.0 Type-A plugs, so the host and the peripheral must each present a matching Type-A receptacle. The cable carries data and power only; it does not supply video or alternate modes. Verify that your devices use Type-A connectors rather than Type-C, Micro-B or proprietary ports.
Highlights
- Transfers data at up to 5Gbps with USB 3.0 host and device
- Extends reach by 60cm for SSDs, cameras and other USB 3.0 gear
- Gold-plated connectors and welded ends resist damage from tugs
- Flat tangle-free jacket and aluminium shell stay tidy in a bag
- Single-piece moulded build withstands daily plugging and unplugging
Specifications
| Brand | Fervit |
|---|
Questions about this item
What clearance does the flat 60cm cable need behind a device?
The ultra-flat profile and tangle-free jacket let it slide into tight gaps behind SSDs, cameras or hubs without adding bulk.
How do I connect the Type-A male ends without stressing the welded strain relief?
Align each gold-plated connector squarely with the port and push straight in; the heavy moulded ends absorb tugs so the solder joints stay intact.
When should I replace the cable if 5Gbps transfers become unreliable?
Swap it out if the blue aluminium shells loosen, the jacket kinks permanently, or sustained 3.0 speeds drop to 2.0 levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


