We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular dual USB 3.0 Type-A panel with two screw holes connected to a single 20-pin motherboard header cable 50cm long

Fervit

Fervit Stackable USB 3.0 20-pin header to dual Type-A panel cable 50cm

SKU CH-ECDS-RGTQ2

Connects a motherboard 20-pin header to two USB 3.0 Type-A front-panel ports with screw-mount brackets over a 50 cm length

  • Adds two front-panel USB 3.0 ports from one motherboard 20-pin header
  • 50 cm cable reaches most chassis front panels cleanly
  • Stackable design keeps the header free for other devices
  • Dual Type-A sockets mount securely with two screw holes
  • Direct 20-pin connection enables full USB 3.0 speeds without adapters

USB 3.0 front-panel adapter for desktop builds

This cable converts a single motherboard 20-pin header into two standard Type-A ports on a chassis front panel. It suits system integrators and DIY builders who need extra USB 3.0 connectivity without occupying rear I/O slots. The 50 cm length reaches most mid-tower front-panel cutouts.

Simple screw-mount installation with keyed header

The female panel end includes two screw holes for secure mounting in a standard front-panel opening. The 20-pin connector is keyed to prevent reversed insertion, so the only common mistake is forcing the header onto misaligned pins. No drivers or BIOS changes are required once the cable is seated.

Steady throughput for sustained transfers

The 3.0 link maintains full signalling rate during extended file copies or backups across both ports simultaneously. Because the two Type-A sockets share the single 20-pin channel, aggregate bandwidth divides when both ports are active, but the connection remains stable without thermal throttling or signal drop-out.

Highlights

  • Adds two front-panel USB 3.0 ports from one motherboard 20-pin header
  • 50 cm cable reaches most chassis front panels cleanly
  • Stackable design keeps the header free for other devices
  • Dual Type-A sockets mount securely with two screw holes
  • Direct 20-pin connection enables full USB 3.0 speeds without adapters

Specifications

BrandFervit

Questions about this item

How can I verify the cable is working after connecting it to the motherboard 20-pin header?

Plug a USB 3.0 device into each Type-A port; both should enumerate at 3.0 speeds and transfer data without errors.

What comes in the box and is anything else required for installation?

The cable assembly with dual Type-A panel ends and a single 20-pin header connector is included; you only need a free 20-pin USB 3.0 header on the motherboard and two screws for the panel mount.

Which version or capacity should I choose for my build?

This model provides two USB 3.0 Type-A ports from one 20-pin header at a fixed 50 cm length; choose it when you need exactly that port count and reach.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.