We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SlimSAS SFF8654 8i to dual SAS 8087 breakout cable .5m 32AWG

Fervit

Fervit SlimSAS SFF8654 8i 4.0 to Dual SAS 8087 Cable .5m 32AWG 24G

SKU CH-YPZZ-TVZY2

Splits one SlimSAS SFF8654 8i 4.0 port into two SAS 8087 ports for 24Gbps storage expansion using 32AWG copper wire and anti-misdirection connectors in a .5m length

  • Splits one SFF8654 8i 4.0 port into two SFF8087 Mini SAS connectors
  • Delivers up to 24Gbps parallel throughput for multi‑drive storage arrays
  • 32AWG low‑loss copper reduces attenuation and crosstalk for signal stability
  • Anti‑misdirection design prevents reverse insertion during server builds
  • Compact .5m length allows tidy internal routing in rackmount chassis

SlimSAS SFF8654 8i breakout cable

This cable connects a single SlimSAS SFF8654 8lane PCIe 4.0 host port to two independent SFF8087 Mini SAS connectors. It is built for administrators expanding storage inside rackmount servers, RAID controllers or storage backplanes. The 0.5 metre length keeps internal routing tidy in dense chassis.

24Gbps bandwidth with 32AWG copper

The assembly supports up to 24Gbps parallel data transmission across eight lanes. Premium 32AWG lowloss copper wire reduces signal attenuation and crosstalk for stable operation. It handles multi-drive arrays comfortably but will not serve longer runs between separate enclosures.

Antimisdirection connectors prevent errors

Each connector uses an antimisdirection design that blocks reverse insertion during installation. This reduces assembly mistakes and protects both the cable and the host port in high-density server builds. No additional software or adapters are included with the cable.

Highlights

  • Splits one SFF8654 8i 4.0 port into two SFF8087 Mini SAS connectors
  • Delivers up to 24Gbps parallel throughput for multi‑drive storage arrays
  • 32AWG low‑loss copper reduces attenuation and crosstalk for signal stability
  • Anti‑misdirection design prevents reverse insertion during server builds
  • Compact .5m length allows tidy internal routing in rackmount chassis

Specifications

BrandFervit

Questions about this item

Will the SFF8654 8i 4.0 connector work with my existing RAID controller that uses SFF8087 ports?

Yes, the breakout cable splits one SFF8654 8lane PCIe 4.0 host port into two independent SFF8087 Mini SAS ports for direct compatibility.

How can I verify the cable is delivering the 24Gbps link speed after installation?

Check the RAID controller or HBA management utility for negotiated link speed; each SFF8087 port should report a 24Gbps connection when drives are active.

Does the package include both SFF8087 ends or do I need to buy a second cable?

One cable provides both SFF8087 connectors; the single .5m assembly splits from the SFF8654 end into dual SFF8087 ports, so nothing else is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.