We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 100cm cable with wide 74pin SFF8654 connector splitting into eight SATA 7pin plugs

Fervit

Fervit Slimline SAS 4.0 SFF8654 8i 74Pin to 8×SATA 7Pin Fanout Cable 100cm

SKU CH-1X5G-940Y2

Converts a single SFF8654 8i host port into eight independent SATA 7Pin drive connections with SAS 4.0 compliant shielded wiring over a 100cm length for multi-drive RAID expansion in enterprise

  • Converts one SFF8654 8i port into eight SATA ports for multi-drive RAID expansion
  • SAS 4.0 compliant for stable high-speed data transmission across all connected drives
  • 74-pin SFF8654 host to SATA 7-pin target enables enterprise server storage upgrades
  • 100cm length allows flexible internal cable routing in dense chassis
  • Shielded anti-interference construction maintains signal integrity in demanding environments

Host-to-Target Fanout Cable

The Fervit Slimline SAS 4.0 cable converts a single SFF8654 8i host port into eight independent SATA 7-pin target connections. It is built for RAID storage expansion inside enterprise servers and workstations. Shielded construction supports stable high-speed data transmission across all linked drives. The 100cm length allows flexible internal routing in dense chassis.

Server Builders Expanding Drive Counts

This cable suits administrators adding multiple hard disks to a RAID controller or HBA that exposes an SFF8654 8i interface. It is not for systems lacking that specific host connector or for installations requiring external eSATA connectivity. Builders needing a different pin layout or protocol should verify their controller specification first.

SFF8654 8i 74-Pin Host Interface

The single 74-pin SFF8654 8i plug is the decisive compatibility factor; the host side must present this exact port for the fanout to function. Eight SATA 7-pin receptacles on the target side each carry one drive link. SAS 4.0 compliance ensures the electrical performance matches the controller specification.

Highlights

  • Converts one SFF8654 8i port into eight SATA ports for multi-drive RAID expansion
  • SAS 4.0 compliant for stable high-speed data transmission across all connected drives
  • 74-pin SFF8654 host to SATA 7-pin target enables enterprise server storage upgrades
  • 100cm length allows flexible internal cable routing in dense chassis
  • Shielded anti-interference construction maintains signal integrity in demanding environments

Specifications

BrandFervit

Questions about this item

What host controller do I need to connect this SFF8654 8i 74Pin cable?

You need a controller or backplane with an SFF8654 8i 74Pin port that supports SAS 4.0.

Will this fanout cable work with my existing SATA 7Pin hard drives?

Yes, each of the eight SATA 7Pin connectors accepts standard SATA hard drives or SSDs.

How can I confirm the SAS 4.0 link is running at full speed after installation?

Check your RAID controller BIOS or OS utility for a negotiated SAS 4.0 link on all eight target ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.