We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slimline SAS 4.0 SFF-8654 38-pin host connector fanning out to four SFF-8482 29-pin drive connectors on a 100 cm cable

Fervit

Fervit SFF8654 4i 38pin to 4× SFF8482 29pin SAS 4.0 fanout cable 100cm

SKU CH-NGE9-YNHAK

Converts one SFF-8654 38-pin Slimline SAS 4.0 host port to four SFF-8482 29-pin SAS drive ports for RAID expansion in servers with a 100cm length

  • Converts one SFF8654 38pin host port to four SFF8482 29pin drive ports
  • SAS 4.0 compliant design delivers stable high-bandwidth data transmission with low signal loss
  • 100cm length enables flexible routing in large rackmount servers and storage enclosures
  • Optimised for RAID controller connections supporting multi-drive expansion in enterprise systems
  • Robust server-grade construction ensures reliable long-term operation in data centre environments

SFF8654 4i fanout cable for RAID expansion

This Fervit cable converts a single SFF8654 4lane 38pin Slimline SAS 4.0 host port into four SFF8482 29pin SAS target ports. It is built for enterprise server storage systems that need multiharddisk expansion from one RAID controller connection. The 100cm length allows flexible routing inside large rackmount enclosures.

Check host port and drive connectors before ordering

Verify that your RAID controller or HBA presents an SFF8654 4i 38pin Slimline SAS 4.0 interface. Confirm each target drive or backplane uses an SFF8482 29pin SAS connector. Ensure the 100cm reach suits your chassis layout and cable management plan.

Fanout design enables four drives from one port

The 1to4 splitter lets one host port serve four SAS hard disks without extra controller ports. SAS 4.0 compliant signalling preserves highbandwidth data transmission with low signal loss across all four lanes. Servergrade construction supports reliable longterm operation in data center and RAID array environments.

Highlights

  • Converts one SFF8654 38pin host port to four SFF8482 29pin drive ports
  • SAS 4.0 compliant design delivers stable high-bandwidth data transmission with low signal loss
  • 100cm length enables flexible routing in large rackmount servers and storage enclosures
  • Optimised for RAID controller connections supporting multi-drive expansion in enterprise systems
  • Robust server-grade construction ensures reliable long-term operation in data centre environments

Specifications

BrandFervit

Questions about this item

Does the 100 cm cable include the SFF8482 29pin connectors for four drives, or must they be purchased separately?

The cable is a complete 1-to-4 fanout assembly: one SFF8654 4i 38pin host connector and four SFF8482 29pin drive connectors are already attached, so no additional connectors are required.

Should I choose this SFF8654 4i 38pin to 4× SFF8482 29pin cable or a different pin-count version for my RAID controller?

Use this exact cable when your RAID controller or HBA presents a single SFF8654 4i 38pin Slimline SAS 4.0 port and you need to connect four drives with SFF8482 29pin interfaces; other pin-count cables will not mate with those ports.

What does the SAS 4.0 label on the 38pin host side mean for real-world throughput to the four 29pin drives?

The SAS 4.0 compliant design delivers stable high-bandwidth transmission with low signal loss across all four lanes, enabling each connected drive to operate at the full SAS 4.0 link rate supported by the controller and the drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.