Fervit
Fervit Right-Angled USB 2.0 Type-A to USB-C Flat FPC Cable 50cm
A flat, flexible USB 2.0 cable with a right-angled Type-A plug and straight Type-C connector, supplied as a 50 cm self-assembly kit for gimbal and camera use
- Right-angled plug fits tight spaces for FPV and camera rigs
- Flat FPC construction stays flexible on brushless gimbals
- USB 2.0 data at 480Mbps connects disks and phones
- 50 cm length keeps cable runs short and tidy
- Supplied as parts for self-assembly to match your build
Right-Angled USB 2.0 Type-A to USB-C Cable
This flat FPC cable connects USB-C devices such as FPV gear, disks or phones to a USB 2.0 Type-A port. It is designed for tight installations where a low-profile right-angled plug is required. The 50 cm length suits compact builds and camera gimbal rigs. Buyers needing longer runs beyond 200 cm or USB 3.0 speeds should look elsewhere.
Thermals Noise and Power Draw
Passive construction means no fan noise and no active cooling requirement. The cable draws only the bus power allowed by the USB 2.0 specification. Its flat, soft FPC body dissipates heat across a wide surface without hotspots. No additional power adapter or thermal management is involved.
Self-Assembly Kit Contents
The cable and connector ship separately and must be assembled by the user following the included guide. This approach lets builders route the flat cable through narrow channels before terminating the ends. No software, drivers or extra accessories are bundled. The assembly step adds installation time but enables custom routing.
Highlights
- Right-angled plug fits tight spaces for FPV and camera rigs
- Flat FPC construction stays flexible on brushless gimbals
- USB 2.0 data at 480Mbps connects disks and phones
- 50 cm length keeps cable runs short and tidy
- Supplied as parts for self-assembly to match your build
Specifications
| Brand | Fervit |
|---|
Questions about this item
How do I assemble the right-angled USB-C connector onto the flat FPC cable, and which step do people often get wrong?
The cable and connector ship separately; align the exposed FPC traces with the connector contacts before locking the retention clip, as reversing the cable orientation is the common mistake.
Will the flat FPC cable need replacement after repeated bending on a gimbal, and what wears first?
The soft flat cable is designed for brushless gimbal movement, but the FPC traces and solder joints at the connector ends fatigue first under constant flexing.
At what point does the USB 2.0 480Mbps limit become the bottleneck during sustained FPV video transfer?
The 480Mbps ceiling appears immediately when streaming high-bitrate FPV footage, capping sustained throughput well below what the camera sensor can produce.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



