We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fervit

Fervit Right Angled USB 2.0 Type-A to USB-C Flat FPC Cable 20cm

SKU CH-Q945-X32DJ

A flat, soft FPC cable with a right-angled USB-A plug that carries USB 2.0 data at 480 Mbps for gimbal-mounted cameras and other devices

  • Right-angled Type-A plug keeps the cable flat against the device
  • Flat FPC construction stays flexible for brushless gimbal work
  • USB 2.0 data transfer at 480 Mbps for FPV and phone links
  • 20 cm length gives a short tidy run without excess slack
  • Cable and connectors supplied separately for self-assembly to suit custom builds

Right-Angled USB 2.0 Type-A to USB-C Cable

This 20 cm flat FPC cable connects USB-C devices such as FPV cameras, portable drives or phones to a standard USB 2.0 Type-A port. The right-angled connector reduces strain in tight spaces. It is intended for builders who need a slim, flexible link for low-profile mounts or gimbal rigs. Buyers requiring USB 3.0 or higher throughput should choose a different cable.

Thermals Noise and Power Draw

The passive cable carries only USB 2.0 data at 480 Mbps and draws negligible power from the host port. No active electronics or cooling are present, so it adds no audible noise or measurable heat during normal operation. Power delivery is limited to what the USB 2.0 specification allows for the connected device.

Self-Assembly Flat FPC Design

The cable and connectors ship separately and must be assembled by the user following the supplied guide. This approach lets the flat, soft FPC ribbon be routed through narrow channels before the plugs are fitted. It suits custom drone or gimbal builds where pre-terminated cables would not fit. Users who need a ready-to-use cable will find this kit unsuitable.

Highlights

  • Right-angled Type-A plug keeps the cable flat against the device
  • Flat FPC construction stays flexible for brushless gimbal work
  • USB 2.0 data transfer at 480 Mbps for FPV and phone links
  • 20 cm length gives a short tidy run without excess slack
  • Cable and connectors supplied separately for self-assembly to suit custom builds

Specifications

BrandFervit

Questions about this item

How do I assemble the right-angled USB-C connector on the 20cm flat FPC cable?

The cable and connector ship separately; align the exposed FPC traces with the connector contacts, insert fully, then press the latch until it clicks — reversing the orientation is the common mistake.

Will the flat FPC cable need replacement after repeated gimbal flexing?

The soft flat FPC is designed for brushless gimbal movement, but inspect the 20cm length regularly for crease fatigue or trace cracks and replace if signal drops appear.

At what point does the USB 2.0 480Mbps limit become a bottleneck during sustained transfers?

Continuous reads or writes above roughly 480 megabits per second will saturate the USB 2.0 link, so large file copies or high-bitrate video streams hit that ceiling first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.